65xx-A1 Family Router Users Guide

66

7.

Click

Save/Apply

.

QoS Classification

You can configure the Quality of Service to apply different priorities to traffic on the router.

The

Add Network Traffic Class Rule

screen allows you to add a network traffic class rule.

65xx-A1 Family Router Users Guide

67

To add a rule:

1.

In the

Quality of Service—QoS Classification

screen, click

Add

.

=

2.

In the

Add Network Traffic Class Rule

screen give a name to this traffic class.

3.

Specify a

Rule Order

and enable the rule in the

Rule Status

.

4.

Enter

Classification Criteria

:

•

Class Interface

: The interface to apply the rule on. Depending on the class of interface

options for the traffic rule will change.

•

Ether Type

: Type of Ethernet packet used on the interface. Depending on the Ether Type

selected, options for the traffic rule will change.

•

Source/Destination MAC Address

and

Source/Destination MAC Mask

. Source and

destination MAC address.

•

For UDP and TCP protocols, also enter

Source

and

Destination

ports.

5.

Enter

Classification Results

:

•

Assign Classification Queue

: The interface to apply the rule on. Depending on the

class of interface options for the traffic rule will change.

•

Mark DSCP

: Type of Ethernet packet used on the interface. Depending on the Ether

65xx-A1 Family Router Users Guide

68

Type selected, options for the traffic rule will change.

•

Mark 802.1p Priority

. 802.1p priority.

•

Tag VLAN ID

:

VLAN ID.

6.

Click

Save / Apply

to save the settings.

Routing

Under the Routing heading you assign a default gateway, create a routing table (in Static Route),

create routing policy rules, and activate Routing Information Protocol (RIP) on the device.

Default Gateway

You can enable an automatic assigned default gateway on the

Routing – Default Gateway

screen or specify a static default gateway. By default, the router will use an available WAN

interface as the default gateway.

To enable

Automatic Assigned Default Gateway

leave the checkbox checked. To disable

Automatic Assigned Default Gateway

uncheck the checkbox.

65xx-A1 Family Router Users Guide

69

If you change the automatic assigned default gateway address, you must reboot the router to be

assigned a new default gateway IP address.

Static Route

To add a routing table use the

Static Route

page. A maximum of 32 entries can be configured.

1.

Click

Add

.

65xx-A1 Family Router Users Guide

70

2.

Enter the route information and then click

Apply/Save

.

Policy Route

The policy routing feature allows the administrator to have more control over how packets should

flow through the modem and into their networks. The feature allows administrator to route IP

packets according to their Source Interface; Source/Destination IP address/subnets; IP Protocols;

Source/Destination Ports to specific Gateway address and/or Gateway Interfaces.