65xx-A1 Family Router Users Guide

56

The

Add IP Filter -- Outgoing

screen will appear. Add the filter name, source information (from

the LAN side), and destination information (from the WAN side). Then click

Save / Apply

.

When you

Save / Apply

the IP filter, the

Outgoing IP Filtering Setup

screen appears. The

Outgoing IP Filtering Setup

screen lists the outgoing IP filters, including filters which were

added from the previous screen.

You can view, add or delete outgoing filters. The

Remove

button appears only when you have an

existing IP filter already set up.

IP Filtering—Incoming

Incoming IP filter filters the WAN traffic to the LAN side. Click

Add

to add incoming filter settings.

65xx-A1 Family Router Users Guide

57

Enter a filter name, information about the source address (from the WAN side), and information

about the destination address (to the LAN side). Select the protocol and WAN interface to apply

the filter to, then click

Save/Apply

to add the setting.

You can view and delete the incoming filter settings in the

Add Ip Filter -- Incoming

screen.

-

65xx-A1 Family Router Users Guide

58

When you

Save / Apply

the IP filter, the

Incoming IP Filtering Setup

screen appears. The

Incoming IP Filtering Setup

screen lists the incoming IP filters, including filters which were

added from the previous screen.

You can view, add or delete incoming filters. The

Remove

button appears only when you have an

existing IP filter already set up.

65xx-A1 Family Router Users Guide

59

MAC Filtering

MAC filtering can forward or block traffic by MAC address. You can change the policy or add

settings to the MAC filtering table in the

MAC Filtering Setup

screen.

To add a setting to the MAC filtering table, then click

Add

to access the

Add MAC Filter

screen,

then configure the MAC filter.

•

Protocol type

: Type of protocol to filter.

•

PPPoE

•

IPv4

•

IPv6

•

AppleTalk

•

IPX

•

NetBEUI

•

IGMP

•

Destination MAC Address

: the destination MAC address you want to filter

•

Source MAC Address

: define the source MAC address

•

Frame Direction

: You can define the direction of the filter.

Options are

•

LAN TO WAN and WAN TO LAN

•

WAN to LAN

•

LAN to WAN

65xx-A1 Family Router Users Guide

60

•

WAN Interfaces

: defines the WAN interface for this filter.

This drop down list will show all

the available WAN interfaces.

Click

Save/Apply

to save the MAC filter.

When you

Save / Apply

the IP filter, the

MAC Filtering Setup

screen appears. The

MAC

Filtering Setup

screen lists the MAC filters, including filters which were added from the previous

screen.

You can view, add or delete MAC filters. The

Remove

button appears only when you have an

existing IP filter already set up.