65xx-A1 Family Router Users Guide

61

Parental Control

Use the Parental Control feature to restrict the days and times a particular device is allowed to

access the Internet.

Time Restriction

To setup parental controls:

1.

Click

Add

to set up the restrictions.

65xx-A1 Family Router Users Guide

62

The

Add Parental Control

screen appears.

2.

Enter a

User Name

to identify the target of the restrictions. .

This is equivalent to the host

name of the IP clients (refer to the

DHCP status

screen check to see the host names)

3.

Enter the MAC address of the network adapter to be restricted, and, optionally, another MAC

address.

65xx-A1 Family Router Users Guide

63

4.

Select the days of the week the restriction is in force.

5.

Specify the start and end times the restriction is in force. Use the form hh:mm, where 23:59,

for example, is one minute before midnight.

6.

Click

Save / Apply

to save the settings and to continue.

URL Filter

Access to websites can be blocked by creating a URL filter. Two types of lists can be created,

either an exclude or include list.

1.

Select the

Exclude

button or

Include

button to specify the web sites you want to block or

allow access.

2.

Click

Add

to continue to the next screen to enter the URL address.

3.

In

URL Address

enter the URL address; in

Port Number

enter the port number and click

Save / Apply

.

If no port number is entered, the default 80 port will be applied. Continue this process until all

the necessary websites are entered.

65xx-A1 Family Router Users Guide

64

Quality of Service

You can configure the Quality of Service to apply different priorities to traffic on the router.

Queue Config

In the

QoS -- Queue Management Configuration

page you can enable a queue for a network

interface. Each interface associated with QoS is allocated three queues. Lower Queue

Precedence values denote a higher priority for the queue, so “1” has higher priority than “2.”

To enable QoS:

1.

From the

Quality of Services

page, check

Enable QoS

.

2.

From the

Select Default DSCP Mark

drop down select the option as directed by your ISP.

65xx-A1 Family Router Users Guide

65

Differentiated Services Code Point (DSCP) is a means to classify packets in the IP header of

the packet.

To associate an interface with QoS:

3.

From the

Queue Config

page, click

Add

.

4.

In the

QoS Queue Configuration

page enter the name of the queue and enable the queue

by selecting

Enable

from the

Queue Configuration Status

drop down.

5.

Select the interface from the

Interface

drop down.

6.

Set the priority for the queue from the

Precedence

drop down. For WAN interfaces, only

Path 0 is supported for

DSL Latency

.