Page 91 / 145
Scroll up to view Page 86 - 90
65xx-A1 Family Router Users Guide
91
3.
Select interfaces from the available interface list and add them to the grouped interface list
using the arrow buttons to create the required mapping of the ports.
4.
Click
Save/Apply
.
LAN Ports
Enable/disable virtual LANs. Virtual LANs are used to enhance security and manage traffic going
to different networks.
IPSec
Internet Protocol Security (IPSec) allows you to set up secure tunnel access between two IP
addresses. Encryption and key exchange make this a secure way to access remote networks.
Contact your ISP for the necessary information to correctly configure this connection.
Page 92 / 145
65xx-A1 Family Router Users Guide
92
Click
Add New Connection
to access the IPSec Settings screen to enter your configurations.
Page 93 / 145
65xx-A1 Family Router Users Guide
93
Page 94 / 145
65xx-A1 Family Router Users Guide
94
The
Show Advanced Settings
button at the bottom of the screen provides additional encryption
settings.
Page 95 / 145
65xx-A1 Family Router Users Guide
95
Certificate
Use the Certificate screen to add, view, or remove a certificate for use by a peer to verify your
identity. A maximum of four certificates can be stored. You can add a certificate either by creating
a new one or importing an existing one from a location where one is stored.
Note:
Certificates are used with TR-069. Firmware that does not support TR-069 will not support
certificates.
Local
A local certificate identifies your device over the network.
To apply for a certificate:
1.
Click
Create Certificate Request.
The
Create new
certificate
request
screen allows you to create a new certificate request.
19216811.live