Page 101 / 145
Scroll up to view Page 96 - 100
65xx-A1 Family Router Users Guide
101
Page 102 / 145
65xx-A1 Family Router Users Guide
102
Security
The
Wireless – Security
screen allows you to select the network authentication method and to
enable or disable WPS (WiFi Protected Setup).
Note
that depending on whether WPS is enabled and the network authentication method that is
selected, the screen will change accordingly so additional fields can be configured for the specific
authentication method.
WPS setup (5618/6519 only)
•
Enable WPS
— WPS securely allows client access to the router. When you enable WPS,
clients must start the access process within two minutes. The router supports the PIN WPS
method only.
•
Add Client
— For WPA-PSK, WPA2 PSK or OPEN modes, enter a PIN, then click
Add
Enrollee
. The client must enter this PIN within two minutes to start the WPS procedure.
•
Set WPS AP Mode
—If your provider is using an external registrar for security, select
Configured
. The PIN for AP mode is specified by the registrar. Provide this PIN to the client.
Click
Config AP
to begin the registration process with the client.
Page 103 / 145
65xx-A1 Family Router Users Guide
103
Manual Setup AP
Network authentication methods include the following.
Page 104 / 145
65xx-A1 Family Router Users Guide
104
•
Open
— anyone can access the network. The default is a disabled WEP encryption setting
Page 105 / 145
65xx-A1 Family Router Users Guide
105
•
Shared
— WEP encryption is enabled and encryption key strength of 64-bit or 128-bit needs
to be selected. Click on Set Encryption Keys to manually set the network encryption keys. Up
to 4 different keys can be set and you can come back to select which one to use at anytime.
19216811.live