Page 6 / 20
Scroll up to view Page 1 - 5
4
NanoStation
™
M/NanoStationloco
™
M Quick Start Guide
Installation Requirements
• 10 mm wrench
•
Shielded Category 5 (or above) cabling should be used for all
wired Ethernet connections and should be grounded through
the AC ground of the PoE.
We recommend that you protect your networks from the
most brutal environments and devastating ESD attacks
with industrial-grade shielded Ethernet cable from Ubiquiti
Networks. For more details, visit
www.ubnt.com/toughcable
Typical Deployment
NanoStationloco
LAN or Computer to
Ethernet Port labeled
LAN
on PoE Adapter
Ethernet Port on
Ubiquiti Device to
Ethernet Port labeled
POE
on PoE Adapter
Connect the
Power Cord
to the PoE Adapter and
a power outlet
POE
Host Computer IP Address
192.168.1.x
LAN
Default IP Address
192.168.1.20
NanoStation
Page 7 / 20
5
Accessing airOS
Accessing airOS
Connect to the airOS Configuration Interface.
1.
Make sure that your host machine is connected to the LAN that
is connected to the Ubiquiti device.
2.
Configure the Ethernet adapter on your host system with a
static IP address on the 192.168.1.x subnet.
3.
Launch your web browser. Type
in the
address field and press
enter
(PC) or
return
(Mac).
4.
The login screen will appear. Enter
ubnt
in the
Username
and
Password
fields. Select your
Country
and
Language
. You must
agree to the
Terms of Use
to use the product. Click
Login
.
Note:
The country that the product is being used in should
be selected from the
Country
drop-down. U.S. product
versions are locked to the U.S. Country Code to ensure
compliance with FCC regulations.
The airOS Configuration Interface will appear, allowing you to
customize your settings as needed.
For additional details on the airOS Configuration Interface, refer to
the User Guide available at
documentation.ubnt.com/airmax
Page 8 / 20
6
NanoStation
™
M/NanoStationloco
™
M Quick Start Guide
Installer Compliance Responsibility
Devices must be professionally installed and it is the professional
installer's responsibility to make sure the device is operated within
local country regulatory requirements.
Since Ubiquiti Networks equipment can be paired with a variety
of antennas and cables, the
Antenna Gain
,
Cable Loss
, and
Output
Power
fields are provided to the professional installer to assist in
meeting regulatory requirements.
Page 9 / 20
7
Specifications
Specifications
NanoStation
Dimensions
294 x 30 x 80 mm
Weight
NSM2/NSM5
NSM3/NSM365
0.4 kg
0.5 kg
Operating Frequency
NSM2
NSM3
NSM365
NSM5
2412 - 2462 MHz
3400 - 3700 MHz
3650 - 3675 MHz
5170 - 5875 MHz*
Gain
NSM2
NSM3/NSM365
NSM5
11 dBi
13.7 dBi
16 dBi
Max. Power Consumption
8 W
Power Supply
NSM2/NSM5
NSM3/NSM365
24V, 0.5A PoE Adapter Included
24V, 1A PoE Adapter Included
Power Method
Passive PoE (Pairs 4, 5+; 7 ,8 Return)
Mounting
Pole-Mounting Kit Included
Networking Interface
(2) 10/100 Ethernet Ports
Operating Temperature
-30 to 75° C
Operating Humidity
5 - 95% Condensing
*
Only 5725 - 5850 MHz supported in the USA
(US units with FCC ID: SWX-NSM5D are allowed 5250 - 5850 MHz.)
Page 10 / 20
8
NanoStation
™
M/NanoStationloco
™
M Quick Start Guide
NanoStationloco
Dimensions
locoM9
locoM2/locoM5
164 x 72 x 199 mm
163 x 31 x 80 mm
Weight
locoM9
locoM2/locoM5
0.9 kg
0.18 kg
Operating Frequency
locoM9
locoM2
locoM5
902 - 928 MHz
2412 - 2462 MHz
5170 - 5875 MHz*
Gain
locoM9/locoM2
locoM5
8 dBi
13 dBi
Max. Power Consumption
locoM9
locoM2/locoM5
6.5 W
5.5 W
Power Supply
locoM9
locoM2/locoM5
24V, 1A PoE Adapter Included
24V, 0.5A PoE Adapter Included
Power Method
Passive PoE (Pairs 4, 5+; 7 ,8 Return)
Mounting
Pole-Mounting Kit Included
Networking Interface
(1) 10/100 Ethernet Port
Operating Temperature
-30 to 75° C
Operating Humidity
5 - 95% Condensing
*
Only 5725 - 5850 MHz supported in the USA
(US units with FCC ID: SWX-M5LD are allowed 5250 - 5850 MHz.)
19216811.live