Ubiquiti AirOS-AirGrid-M5HP Router Manual PDF (Setup & Configuration Guide)
Given below is full router user manual of Ubiquiti AirOS-AirGrid-M5HP router model. You can also download this manual in PDF Format to read later on your computer.
Product user manuals come handy in case you want to know all functionalities of your device, troubleshooting, fist time configuration & setup and in many other situations.
Page 1 / 33
MANUAL AirOS
Page 2 / 33
Contents
•
1 AirOS Introduction
•
2 Configuration Guide
o
2.1 Navigation
o
2.2 Main Page
°
2.2.1 Status Reporting
°
2.2.2 Statistics Reporting
°
2.2.3 Extra info
°
2.2.4 Tools
°
2.2.5 Antenna Alignment
o
2.3 Link Setup Page
°
2.3.1 Basic Wireless Settings
°
2.3.2 Wireless Security
o
2.4 Network
°
2.4.1 Bridge Mode
°
2.4.2 Router Mode
o
2.5 Advanced
°
2.5.1 Advanced Wireless Setting
°
2.5.2 Acknowledgement Timeout
°
2.5.3 Antenna Settings
°
2.5.4 Antenna Alignment LED Thresholds
°
2.5.5 Wireless Traffic Shaping
°
2.5.6 QoS
o
2.6 Services
°
2.6.1 Ping WatchDog
°
2.6.2 SNMP Agent
°
2.6.3 NTP Client, Web Server, Telnet Server
o
2.7 System
°
2.7.1 Administrative Management
°
2.7.2 Router Protocol Host Name
°
2.7.3 Logo Customization
°
2.7.4 UI Language Selection
°
2.7.5 Firmware
°
2.7.6 Configuration Management
°
2.7.7 Device Maintenance
Page 3 / 33
AirOS Introduction
The design goal of AirOS was simplicity and power. Unlike previous and current
market-leading wireless or router operating systems that are complex and require a
training investment, Ubiquiti set out to make an advanced operating system capable of
powerful wireless and routing features, but was built upon a simple, clean, intuitive
user interface foundation.
Our goal is to make AirOS simple enough for the operator, customer, or new technician
to easily understand, configure, and deploy. At the same time, it is rapidly evolving
towards a path of new powerful networking and wireless features strongly derived
from customer interaction and feedback. Our goal is to make AirOs both the most
advanced operating system on the market and the most intuitive, easy to deploy.
Configuration Guide
This guide presents the detailed description of the AirOS operating system which is
integrated into long-range embedded systems (LiteStation2, LiteStation5), CPE
(NanoStation2, NanoStation5), and outdoor wireless platforms (PowerStation2,
PowerStation5) manufactured by Ubiquiti Networks, Inc.
AirOS Quick Setup Guide
describes the configuration steps for the subscriber station
(wireless client - bridge) use case.
All the configuration settings accessible via web management interface are described in
this document.
IEEE 802.11b/g
mode is supported in
•
NanoStation2
•
LiteStation2
•
PowerStation2
IEEE 802.11a
mode is supported in
•
NanoStation5
•
LiteStation5
•
PowerStation5
All the devices support the following operating modes:
•
Station (Client)
•
Station
WDS
•
Access Point
•
Access Point
WDS / Repeater
All the devices support the following network modes:
•
Transparent bridge
•
Router
Page 4 / 33
Note: the screen shots in this document represent PowerStation2 graphical user
interface but they are also fully applicable for NanoStation2 and LiteStation2 series
devices. The graphical user interface elements which are specific for the NanoStation5,
LiteStation5 and PowerStation5 are described individually in the this document.
Navigation
Configuration Management Menu
Each of the web management pages (listed below) contain parameters that affect a
specific aspect of the device:
Main
page displays current status of the device and the statistical information. There
are useful network administration and monitoring tools available in Main page also (i.e.
speed test utility, site survey functionality in
AP
mode).
Link Setup
page contains the controls for a wireless network configuration, while
covering basic wireless settings which define device operating modes, associating
details, data security options.
Network
page covers the configuration network operating modes,
IP
settings,
packet
filtering routines and network services (i.e.
DHCP Server
).
Advanced
page settings are dedicated for more precise wireless interface control. It
also includes antenna polarity, traffic shaping and
QoS
settings.
Services
page covers the configuration of system management services (i.e.
SNMP
,
NTP
, Ping Watchdog).
System
page contains controls for system maintenance routines, administrator
account management, device customization and configuration backup.
Main Page
Current Status of the AirOS powered device
Page 5 / 33
The
Main
Page displays a summary of link status information, basic configuration
settings of the device (operating mode, network settings), traffic statistics of all the
interfaces.
Network administration and monitoring utilities such as antenna alignment, ping test,
19216811.live