Ubiquiti NanoStation-M5 Router Manual PDF (Setup & Configuration Guide)
Given below is full router user manual of Ubiquiti NanoStation-M5 router model. You can also download this manual in PDF Format to read later on your computer.
Product user manuals come handy in case you want to know all functionalities of your device, troubleshooting, fist time configuration & setup and in many other situations.
Page 1 / 20
High-Power 2x2 MIMO
airMAX
™
TDMA Station
Models:
NSM2/NSM3/NSM365/NSM5
locoM2/locoM5/locoM9
Page 2 / 20
Page 3 / 20
1
Introduction
Introduction
Thank you for purchasing the Ubiquiti Networks
™
NanoStation
™
M
series product. This Quick Start Guide is designed to guide you
through the installation and show you how to access the airOS
™
Configuration Interface. This Quick Start Guide also includes the
warranty terms and is for use with the following models:
Model
Operating Frequency
Ethernet Ports
NanoStationM2
2412 - 2462 MHz
2
NanoStationM3
3400 - 3700 MHz
2
NanoStationM365
3650 - 3675 MHz
2
NanoStationM5
5170 - 5875 MHz*
2
NanoStationlocoM9
902 - 928 MHz
1
NanoStationlocoM2
2412 - 2462 MHz
1
NanoStationlocoM5
5170 - 5875 MHz*
1
*
Only 5725 - 5850 MHz supported in the USA
(US units with FCC ID: SWX-NSM5D or SWX-M5LD are allowed 5250 - 5850 MHz.)
Package Contents
NanoStation
24V PoE
Adapter
Power Cord
Mounting Ties
(Qty. 2)
Quick Start
Guide
Products may be different from pictures and are subject to change without notice.
TERMS OF USE: Ubiquiti radio devices must be professionally installed. Shielded Ethernet cable and
earth grounding must be used as conditions of product warranty. TOUGHCable is designed for outdoor
installations. It is the customer’s responsibility to follow local country regulations, including operation
within legal frequency channels, output power, and Dynamic Frequency Selection (DFS) requirements.
Page 4 / 20
2
NanoStation
™
M/NanoStationloco
™
M Quick Start Guide
Hardware Overview
Ports
Secondary
Main
Reset
Secondary
Ethernet
Port
Main
Ethernet
Port
Reset
Button
Note:
The
Secondary Ethernet Port
is included on
only the NanoStation M2/M3/M5.
It is capable of 24V
Power over Ethernet output, which can provide power
to a secondary device. It can be enabled using the airOS
19216811.live