TRENDnet TV-IP252P Router Manual PDF (Setup & Configuration Guide)

Page 31 / 106 Scroll up to view Page 26 - 30

Step 4. Confirm Settings

The last step shows the configuration of your camera. When you

confirm the settings, click

Apply

to finish the wizard and reboot

the camera. Otherwise, click

step(s) and change the settings; or click

Cancel

to end the wizard

and discard the changes.

- 30 -

Page 32 / 106

4.3 Basic Setup

The Basic menu contains three sub-menus that provide the

System settings

for the camera, such as the Camera Name,

Location,

Date & Time

, and

User management

.

±

Basic >> System

- 31 -

Page 33 / 106

z

Basic:

This item allows you to assign the camera name

and location information.

-

Camera Name:

Enter a descriptive name for the

camera.

-

Location:

Enter a descriptive name for the location

where the camera is monitored.

z

Indication LED:

This item allows you to set the LED

illumination as desired. There are two options:

Normal

and

OFF

.

±

Basic >> Date & Time

z

Date & Time:

Enter the correct date and time for the

system.

-

TimeZone:

Select the proper time zone for the region

from the pull-down menu.

- 32 -

Page 34 / 106

-

Synchronize with PC:

Select this option and the

date & time settings of the camera will be

synchronized with the connected computer.

-

Synchronize with NTP Server:

Select this option

and the time will be synchronized with the NTP

Server. You need to enter the IP address of the

server and select the update interval in the following

two boxes.

-

Manual:

Select this option to set the

Date

and

Time

manually.

±

Basic >> User

z

Administrator:

To prevent unauthorized access to the

camera’s Web Configuration, you are strongly

recommended to change the default administrator

- 33 -

Page 35 / 106

password. Type the administrator password twice to set

and confirm the password.

z

General User

-

User Name:

Enter the user’s name you want to add

to use the camera.

-

Password:

Enter the password for the new user.

When you are finished, click

Add/Modify

to add the

new user to the camera. To modify the user’s

information, select the one you want to modify from

UserList

and click

Add/Modify

.

-

UserList:

Display the existing users of the camera.

To delete a user, select the one you want to delete

and click

Delete

.

z

Guest

-

User Name:

Enter the guest’s name you want to add

to use the camera.

-

Password:

Enter the password for the new guest.

-

UserList:

Display the existing guests of the camera.

To delete a user, select the one you want to delete

and click

Delete

.

NOTE

The “General User” is allowed to access the camera and

control the Function buttons on the Main screen of the

Web Configuration. The “Guest” can only view the live

view image from the Main screen while accessing the

camera. Only the “Administrator” is allowed to configure

the camera through the Web Configuration.

You can

have up to 11 Accounts between the General and Guest

Accounts.

- 34 -

Rate

Popular TRENDnet Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share