Page 21 / 106
Scroll up to view Page 16 - 20
6.
After installing the IPSetup Utility, the application is
automatically installed to your computer, and creates a
folder in
Start\Program\TRENDnet\IPSetup
.
7.
Click
Start
>
Programs
>
TRENDnet
>
IPSetup
, and then click
IPSetup
.
8.
The IPSetup window will appear.
It will search for
SecurView camera(s) within the same network
- 20 -
Page 22 / 106
Camera Display Area
Camera Display Area:
It shows the connected camera(s)
within the same network.
Double click the IP Address, it will link to the Camera’s Web
Configuration page.
-
Change IP:
Click this button to bring up the following
window.
It allows you to change the IP Address.
You can
select either
Static IP
or click
DHCP
.
Then, enter the
Administrator ID & Password.
By default the ID/Password
is:
admin
.
When complete, click
Change
.
- 21 -
Page 23 / 106
-
Search:
Click this button to search the connected
SecurView camera(s) in the same network.
-
Exit:
Click this button to exit the program.
3.2 Accessing to the Camera
Whenever you want to access the camera:
1.
Open the Web browser on your computer (example showed
in the User’s Guide is based on Internet Ex
2.
Since the default configuration of the camera i
mode enabled, you are recommended to launch IPSetup to
search the IP address that is assigned to the camera by the
DHCP server, and then click
Link
to access the camera via
the Web browser.
Otherwise type the default IP address
(
192.168.10.30
) in the Address bar, and the press [
plorer).
s DHCP
Enter].
- 22 -
Page 24 / 106
hen the login window appears, en
3.
W
ter the default
User
K
screen of the camera’s Web
Configuration.
name
(
admin
) and
Password
(
admin
). Then, click the
O
button to access to the main
Enter the User name
and Password.
NOTE
If you are initially accessing the camera, you will be
asked to install a new plug-in for the camera. Permission
request depends on the Internet security settings of your
on of the camera, the
w:
computer. Click
Yes
to proceed.
After you login into the Web Configurati
Main screen will appear as belo
- 23 -
Page 25 / 106
Zoom In
Buttons
Camera Information
Live View/Setup
- 24 -
The Main page of the Web Configuration provides you with
f
rmation and functions, including:
useful
in o
to configure the camera. For
o
image.
d
±
Fun
vid
z
eo
±
Live View/Setup Switch:
z
Click the
Setup
button
details, see Chapter 4.
z
Click the
Live View
button to return to the Main screen t
view the live view
±
Compression Buttons:
Select to transmit and record the
vi
eo using MPEG4 or MJPEG compression.
ction Buttons:
Use these buttons to control the audio,
eo, and trigger functions.
Manual Record
allows you to record and save a vid
clip.
Live View Image
Compression
Buttons
Function Buttons
19216811.live