Page 51 / 106
Scroll up to view Page 46 - 50
z
Network Storage
-
Samba Server Address:
Enter the IP address of the
Network Storage server.
-
Share:
Assign the folder on the Network Storage
server to share the files to users.
-
Path:
Assign the path for uploading the files on the
Network Storage server. For example,
/Test/
.
-
User Name:
Enter the user name to login into the
Network Storage server.
-
Password:
Enter the password to login into the
Network Storage server.
-
Split By:
When the file is too large to upload
smoothly, use this option to split it by selecting
File
Size
or
Recording Time
.
-
When Disk Full:
Select
Stop Recording
or
Recycle – Delete Oldest Folder
when the storage
space on the Network Storage server is full.
NOTE
If you have enabled
Recording to Storage
feature, after the camera boots up completely, it
will mount to the storage server. If the storage
server is not available at the time, the camera will
remount every
5 minutes for an hour
(12 times)
and then stop remounting.
- 50 -
Page 52 / 106
- 51 -
4.7 Motion Detect
The Motion Detect menu contains the command and option that
allow you to enable and set up the motion detection feature of the
camera. The camera provides two detecting areas.
To enable the detecting area, select
Window 1
or
2
from the pull-
down list, and then select
Enable
. When the detecting area is
enabled, you can use the mouse to move the detecting area and
change the area coverage.
z
Name:
Assign a name to the detecting area.
z
Threshold:
Move the slide bar to adjust the level for
detecting motion to record video.
Page 53 / 106
4.8 Event Config
The Event Config menu contains five sub-menus that provide the
commands to configure event profiles.
±
Event Configuration >> General Setting
z
General
-
Snapshot/Recording Subfolder:
You can assign a
given subfolder to each new captured file. Otherwise,
leave this option blank to use the default setting.
- 52 -
-
Network Storage Recording Time Per Event:
Limit
the recording time while you are using the Network
Storage solution.
Page 54 / 106
-
GPIO Trigger Out Retention Time Per Event:
Limit
the retention time of the GPIO Trigger Out function.
±
Event Configuration >> Arrange Schedule
Profile
z
Schedule Profile:
This sub-menu displays the scheduled
profile(s). To customize the profile, click
Add
and then
enter a descriptive name for the profile in the prompt
dialog window.
z
After entering the profile name, click
OK
and the profile is
added to the Schedule Profiles list. To delete the profile,
select the profile in the list and click
Delete
.
- 53 -
Page 55 / 106
-
Profile Name:
Display the profile name that you
select in the Schedule Profiles list.
-
Weekdays:
Select the weekday(s) that you want to
separately assign in the schedule profile. The
weekday that has been assigned will be displayed
with green color.
-
Time List:
Display the time period that you have
assigned within the selected weekday. To assign the
same time period to every weekday, click
Add this to
all weekdays
; click
Delete this from all weekdays
to remove the selected time period from every
weekday. Click Delete to remove the selected time
period.
-
Start/End Time:
Enter the start and end time and
then click
Add
to assign a time period within in the
selected weekday.
±
Event Configuration >> Motion Detect Trigger
- 54 -
z
Schedule Profile:
Select the
Enable
option to enable the
trigger function of the camera, so that you can send
19216811.live