Page 71 / 106
Scroll up to view Page 66 - 70
-
Scan:
When multiple cameras connected, click this
button to display the video views between cameras.
Click the Scan button again to stop scanning.
-
PREV:
When multiple cameras connected, click this
button to switch the video view to the previous camera.
-
NEXT:
When multiple cameras connected, click this
button to switch the video view to the next camera.
TIP
To set the time interval of scanning, click
SETTING
>
Other
and then adjust the time from 1 to 10 seconds in
the
Time
interval of scan
option.
±
CAMERA
Panel
-
TRIGGER OUT:
Click to turn on the trigger out
connector of the camera. This button is available only
when the connected camera supports the trigger out
connector, which is used to control the external device
connected to the camera, such as a light.
-
SNAPSHOT:
Click to capture a still image using the
selected camera and save the file in the computer.
- 70 -
Page 72 / 106
-
RECORD:
Click to start recording a video clip using the
selected camera. Click again to stop recording and
save the file in the computer.
-
TALK:
Click to speak out through the camera. Please
note only one user is allowed to use this function at the
same time.
-
LISTEN:
Click to receive the on-site sound and voice
from the camera.
±
SYSTEM
Panel
This panel displays the current date and time.
±
Video View Window and Camera List
Video Viewing
Window
Camera List
- 71 -
Page 73 / 106
-
Video Viewing Window:
This window displays the
video view of the selected camera, which can be
divided into 4/9/16 windows according to your selection
in VIEW SELECTION panel.
-
Camera List:
This list displays the information of the
connected camera(s).
To add a camera
1
.
Click
SETTING
in the CONTROLS panel to display the
Setting screen.
2.
Click
Add New Camera
.
- 72 -
Page 74 / 106
3.
In the pop-up Add New Camera dialog window, you can:
z
Select the
Search
tab if you are not sure of the camera’s
IP Address.
Click
Search camera
to search for an
available camera within the network.
Once the camera is
found and is shown in the list, select it and click
Add
Camera
.
z
Select the
Input
tab to add a camera by entering its IP
Address directly.
Enter the camera’s IP Address (default:
192.168.10.30
) and Port (default:
80
), and then click
Add
Camera
.
- 73 -
Page 75 / 106
4.
Enter the User name and Password for the camera, and then
click OK.
The connected camera will be displayed in the
Camera’s List.
5.
Click
SETTING
to return to the Video View Window.
The
video view of the selected camera will be displayed now.
- 74 -
19216811.live