Page 21 / 135 Scroll up to view Page 16 - 20
20
Connecting the Internet Camera
to the Camera Stand
The Internet Camera comes with a
camera stand (optional) with a swivel
ball screw head that can be attached
to the Internet Camera 's bottom
screw hole.
Attach the camera stand to
the Internet Camera and station it for
your application.
There are three holes
located in the base of the camera stand
allowing the Internet Camera to be
mounted on the ceiling or any wall
securely.
Page 22 / 135
21
6
H
ARDWARE
I
NSTALLATION
This section describes the Hardware installation procedure for the
Internet Camera.
1 Connect an Ethernet cable
Connect an Ethernet cable to the
network cable connector located
on the Internet Camera’s rear
panel and attach it to the network.
Page 23 / 135
22
2 Attach the external power
supply
Attach the external power
supply to the DC power input
connector located on the
Internet Camera’s rear panel
and is labeled DC 5V and connect
it to your local power supply.
Note:
Confirm power source is supplied
from the LED indicators label Power
on the Internet Camera is illuminated.
Page 24 / 135
23
7
S
ECURITY
To ensure the highest security and prevent unauthorized usage of
the Internet Camera the Administrator has the exclusive privilege
to access the System Administration for settings and control
requirements to allow users the level of entry and authorize the
privileges for all users.
The Internet Camera supports multi-level
password protection and access to the Internet Camera is strictly
restricted to defined users whom has a "User Name" and "User
Password" which is assigned by the Administrator.
Administrator can release a public user name and password so
when remote users access the Internet Camera they will have the
right to view the image transmitted by the Internet Camera.
Note:
When the Internet Camera is used for the first time it is highly
recommended the Administrator sets the "Admin ID" and "Admin
Password" to constrain users access to the Internet Camera since
the Default settings are Null String.
Once the ID and Password
are defined only the Administrator has the access to management
the Internet Camera.
This procedure should be done as soon as
possible since the security features with the Internet Camera will
not be enabled until the "Admin ID" and "Admin Password" is
defined.
Page 25 / 135
24
8
S
OFTWARE
I
NSTALLATION
This section describes the Software installation procedure of the
Internet Camera for Web Configuration and IPView Application.
Web Configuration
The Internet Camera must be configured through its built-in Web-
based Configuration.
Extensive knowledge of LAN will be helpful in setting up the
Internet Camera
From the web browser enter the default IP address to access the
Welcome screen of the Internet Camera to configure your Internet
Camera type http ://192.168.0.20 in the address box.
The number
is the default IP address of your Internet Camera.
Press Enter.

Rate

4 / 5 based on 1 vote.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top