Page 16 / 135 Scroll up to view Page 11 - 15
15
Rear Panel
Network Cable Connector
The Internet Camera’s rear panel features an RJ-45 connector for
connections to 10Base-T Ethernet cabling or 100Base-TX Fast
Ethernet cabling (which should be Category 5 twisted-pair cable).
The port supports the NWay protocol, allowing the Internet
Camera to automatically detect or negotiate the transmission
speed of the network.
Network Cable
Connector
I/O Connector
DC Power
Connector
Reset Button
Page 17 / 135
16
DC Power Connector
The DC power input connector is located on the Internet
Camera’s rear panel and is labeled DC 5V with a single jack
socket to supply power to the Internet Camera.
Power will be
generated when the power supply is connected to a wall outlet.
Reset Button
Reset will be initiated when the reset button is pressed once and
Power LED begins to flash.
Factory Reset will be initiated when the reset button is pressed
continuously for three seconds or when Power LED begins to
light up.
Release the reset button and the Power LED will begin
to flash indicating the Internet Camera is changing to factory
reset.
When factory reset is completed the IP address will return
to the default setting as 192.168.0.20.
I/O Connector
There are four I/O connectors, two for input and two for output
situated on the rear panel.
The I/O connectors provide the
physical interface to send and receive digital signals to a variety
of external alarm devices.
Please refer to the User’s Guide
appendix for detailed information
.
Page 18 / 135
17
Top Panel
Screw Hole
Located on the top panel of the Internet Camera the screw hole is
used to connect the camera stand onto the Internet Camera by
attaching the screw head on the camera stand into the screw hole
of the Internet Camera.
Bottom Panel
Screw Hole
Screw Hole
Page 19 / 135
18
Screw Hole
Located on the bottom panel of the Internet Camera the screw
hole is used to connect the camera stand onto the Internet Camera
by attaching the screw head on the camera stand into the screw
hole of the Internet Camera.
Page 20 / 135
19
5
U
NPACKING
T
HE
I
NTERNET
C
AMERA
Carefully remove all items from the package.
In addition to this
User’s Guide, be certain that you have:
??
One Internet Camera
??
One Installation CD-ROM
??
One Quick Installation Guide
??
One AC power adapter suitable for your country’s
electric power
??
One Camera Stand
If any item is missing, or if you find any damage or mismatch,
promptly contact your dealer for assistance.

Rate

4 / 5 based on 1 vote.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top