1. Home
    2. /
  2. Manuals
    3. /
  3. TRENDnet
    4. /
  4. TV-IP200v2
    5. /
  5. 9
Page 41 / 135 Scroll up to view Page 36 - 40
40
external alarm devices to the
Internet Camera
such as IR-Sensor
and alarm relay.
Click on
“Trigger”
in the system administration menu bar and
the Trigger screen will appear as illustrated below:
The default setting for the I/O Trigger functions are disabled you
must enable the I/O Trigger first before the Triggers will perform.
There are two options to select from the Trigger screen
I/O Input
1 Trigger
and
I/O Input 2 Trigger.
I/O Input 1 Trigger:
Select
“Send e-mail attached with image”
and enter the relevant
information such as the SMTP Server Address, Sender e-mail
Click on
“Home”
to return to
Welcome Screen
Page 42 / 135
41
Address, Receiver e-mail Address, Sending Interval and Sending
Times.
??
SMTP
(Simple Mail Transfer Protocol) is a protocol for
sending e-mail messages between servers you need to
input the mail server address in this field.
??
Sender e-mail
is the person’s e-mail address whom will
be sending the e-mail.
??
Receiver e-mail
is the e-mail address of the person
whom will receive the e-mail.
??
Sending Interval
is the period of time between each e-
mail being sent to the receiver.
If the setting is at 10
seconds, a new e-mail will be sent in 10 seconds interval
to the receiver.
??
Sending Time
is the number of times the e-mail will be
sent to the receiver before it terminates.
Select
“Trigger I/O Output”
and enter the setting for the
duration of the output device for Output 1 time and Output 2 time
in seconds.
I/O Input 2 Trigger:
Select
“Send e-mail attached with image”
and enter the relevant
information such as the SMPT Server Address, Sender e-mail
Address, Receiver e-mail Address, Sending Interval and Sending
Times.
??
SMTP
(Simple Mail Transfer Protocol) is a protocol for
sending e-mail messages between servers you need to
input the mail server address in this field.
??
Sender e-mail
is the person’s e-mail address whom will
be sending the e-mail.
Page 43 / 135
42
??
Receiver e-mail
is the e-mail address of the person
whom will receive the e-mail.
??
Sending Interval
is the period of time between each e-
mail being sent to the receiver.
If the setting is at 10
seconds, a new e-mail will be sent in 10 seconds interval
to the receiver.
??
Sending Time
is the number of times the e-mail will be
sent to the receiver before it terminates.
Select
“Trigger I/O Output”
and enter the setting for the
duration of the output device for Output 1 time and Output 2 time
in seconds.
Save/Cancel:
After making sure all settings in the System are correct, click on
the
“Save”
icon to store the settings for the
Internet Camera
.
You can alternatively click on the
“Cancel”
icon to restore all
settings to the values last saved to or retrieved from the
Internet
Camera
.
Please refer to the appendix for detailed information regarding
the I/O Connector.
Warning
When connecting other devices through the I/O connectors, please
make sure the maximum current of 100mA is strictly observed.
Any failure to do so might cause a loss of power to the Internet
Camera and possibly cause serious damage to the Internet Camera.
Page 44 / 135
43
System Administration - Information
The Information menu contains commands for displaying
information about the
Internet Camera
.
Click on
“Information”
in the system administration menu bar
and the Information screen will appear as illustrated below:
The Information table provides detailed information of the
Internet Camera such as the Model Name, Firmware Version,
Mac Address, and IP Address.
System Administration - Tools
The Tools menu contains commands for restarting the
Internet
Camera
.
Click on
“Home”
to return to
Welcome Screen
Page 45 / 135
44
Click on
“Tools”
in the system administration menu bar and the
Tools screen will appear as illustrated below:
Reset:
The Reset command restarts the
Internet Camera
just like
turning the device off and on and saved settings are retained.
The
Reset panel contains the message “Do you really want to reset
this device?” and a YES button.
If you do not want to reset the
Internet Camera
, exit the panel without clicking YES, otherwise,
click on the
“YES”
icon and the reset process will initiate.
Factory Reset:
A factory reset restarts the
Internet Camera
and returns all of its
settings to their default values.
The Factory Reset panel contains
the message “Do you really want to factory reset this device?”
and a YES button.
If you do not want to carry out a factory reset
command, exit the panel without clicking YES, otherwise click
on the
“YES”
icon and factory reset will be initiated.
Note:
The Network must be reconfigured after a Factory Reset.
Once the configuration is completed click on
“Home”
to return to
the Welcome screen and select the desired Viewing Image either
Click on
“Home”
to return to
Welcome Screen

Rate

4 / 5 based on 1 vote.

Popular TRENDnet Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top