Page 116 / 135 Scroll up to view Page 111 - 115
115
G Xplug Control Installation
Installation To Web Server
1.
Installation:
Copy the “xplug.ocx” file to any WEB Server table.
2.
Setting
(Configuration):
From the Web Configuration menu select “System” and
under the “Loading ActiveX From” input web server
location
(http://www.web server location.com/).
Once the settings are completed the user now is able to access the
Internet Camera from the web browser by selecting the image
view – ActiveX mode.
Important Information
It is highly recommended to install the Xplug Control
application to the Web Server for IE 5.0.
It must be
installed to a Public Domain with Fixed IP address.
Page 117 / 135
116
Installation To Local PC
Insert the CD-ROM into the CD-ROM drive to initiated the auto-
run program once completed a menu screen will appear as
follows:
To install Xplug Control click on the
"Xplug Control"
button to
activate the installation procedure for the plug-in program.
Page 118 / 135
117
Once executed a prompt will appear requesting the input of the
desired language selection.
Make the desired selection and click
on
“OK”
to continue.
The Welcome screen will appear.
Click on the
“Next”
button to
proceed with the installation.
Page 119 / 135
118
The License Agreement prompt will appear as below.
Read the
details carefully and click on the
“Yes”
icon to continue with the
installation procedure.
Click on the
“Finish”
button to complete Setup of the Xplug
Control Utility program for the
Internet Camera
.
Page 120 / 135
119
H Adjust Internet Camera Focus
The
Internet Camera
features an exchangeable CS-type lens that
can be used for different applications as necessary.
It supports
rotational focus control so the lens can be adjusted to focus under
normal and stable conditions to maximize the image quality of the
Internet Camera
.
To adjust the focus of the lens you need to turn the lens slowly in
either clockwise or anti-clockwise direction until the desired
image appears.
DO NOT over turn the lens in either of the
directions as it will be out of focus.
Unless you want to substitute
the lens DO NOT unscrew more than 1.0mm apart from the Fixed
Lens Assembly.
Keep in mind while adjusting the
Internet Camera
's focus you
can review the image quality from the Web browser.
Camera Lens
Adjust by turning
clockwise or
counter-clockwise
Fixed Lens Assembly
DO NOT adjust

Rate

4 / 5 based on 1 vote.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top