Page 111 / 135
Scroll up to view Page 106 - 110
110
D I/O Connector
I/O Connector Definition for the Internet Camera
An 8-pole connector is provided for auxiliary IO connections to
the
Internet Camera
.
The IO connector provides the physical interface for 2 digital
output and 2 digital input that is used for connecting a diversity of
external alarm devices to the
Internet Camera
such as IR-Sensor
and alarm relay.
The digital input is used for connecting external alarm devices
and once triggered images will be taken and e-mailed.
The supported transistor output can give a maximum of DC 5V to
the externally connected alarm devices and once triggered the
current will activate the devices.
In 11
In 12
In 11 & In 12 is a pair for digital input. It works at voltage 5V
In 21
In 22
In 21 & In 22 is a pair for digital input. It works at voltage 5V
Out 1 +
Out 1 -
Out 1 - & Out 1 + is a pair for digital out. The out put voltage is 5
V and maximum current is 100 mA
Out 2 +
Out 2 -
Out 2 - & Out 2 + is a pair for digital out. The out put voltage is 5
V and maximum current is 100 mA
Page 112 / 135
111
I/O Schematic Diagram
Through the Web Configuration in the Trigger section, you must
first enable the trigger function.
Please refer to the Web
Configuration section for detailed information.
Warning
1.
When connecting a device to the Input connector, the
device must be a passive component without voltage and
electrical current.
2.
When connecting other devices through the Output
connector, please make sure the maximum current of DC
5V, 100mA is strictly observed.
3.
Any failure of the above two points might cause serious
damage to
the camera.
Page 113 / 135
112
E Upgrade Firmware
User’s can update firmware from the IPView application.
Select
“Camera”
>
“Properties”
and the
Camera Property
dialog box
will appear.
Select the
Tools
tab and enter the full path of the
firmware binary file name in the Update Firmware field or you
can click on the
“Browse”
icon to select the file.
Once the
firmware file is entered click on the
“Update”
icon to proceed
with the updating process.
Once completed click on the
“OK”
icon as illustrated below
Warning
During firmware update process please make sure no interruptions will occur
as it might possibly cause serious damage to the Internet Camera
19216811.live