Page 6 / 17
Scroll up to view Page 1 - 5
English
4
3. Configure the Storage Server
Note: It is recommended that you configure the Storage Server from a wired
computer. Since the Storage Server's default IP address is
192.168.10.10,
make sure no other network devices are assigned an IP address of
192.168.10.10.
For Windows Users
3.
Double-click the
NAS Utility
icon.
2.
Follow the
Installation Wizard
instructions and then click
Finish
.
Repeat step 1 and 2 for each
Windows client PC.
4.
Select the storage server and click
Attach
.
1.
Insert the
Utility CD-ROM
into
your computer's CD-ROM Drive
and then click
Install Utility
.
Page 8 / 17
English
6
Your configuration is now complete.
For detailed information regarding the
TS-S402
configuration and advanced
settings, please refer to the Troubleshooting section, User's Guide CD-ROM, or
10.
Click
Device Setting
.
11.
Enter the administrator User
name and Password, and then
click
OK
.
By default:
User Name:
admin
Password:
admin
12.
Click Configuration, and then click
Networking.
Configure the
IP
Address,
Subnet mask
,
Gateway
and then click
Modify
.
Note: The IP Address must match
the network segment of your
network.
Page 9 / 17
English
7
4. Using the TS-S402
Add User
3.
Click the green plus sign to add
additional users.
Note: A User Name can only be
used on one computer at a time.
Add a user name for each client
that will have access to the
TS-S402.
1.
In the browser configuration, click
Share Management
, then
user
management
.
Then click on the
green plus sign.
If you are creating
a shared folder, skip this step and
continue on to
Create Folder
.
2.
Enter a User Name and Password,
confirm the password and then
click
Apply
.
Page 10 / 17
English
8
Access Folder on Windows Client PC
Create Folder
1.
Click
Share
Management, then
click
Share Folder
.
Select the
Disk Name, and enter a Folder
Name
.
Shared Folder
Select
Anonymous
, and then
click apply.
Private Folder
Click
Private Folder
.
Select a
user, then click
Add New User.
Click
Read Only
to give read only
access, then click
Apply
.
1.
Open up the NAS utility (see step
2 and 3 under Section 3: Configure
the Storage Server)
2.
Enter the client's User (user name)
and Password. Then click
Login
.
See
Add User
above if you have
not added a user.
19216811.live