Given below is full router user manual of TRENDnet TS-S402 router model. You can also download this manual in PDF Format to read later on your computer.
Product user manuals come handy in case you want to know all functionalities of your device, troubleshooting, fist time configuration & setup and in many other situations.
Page 2 / 17
Table of Contents
Version 11.28.2007
English
.....................................................................................................
Troubleshooting
........................................................................................
1
1
2
4
7
12
1. Before You Start
2.
.........................................................................
.................................................................................
Hardware Installation
Configure the Storage Server
4. Using the TS-S402
.............................................................................
3.
............................................................
Page 3 / 17
System Requirements
Application
Package Contents
1. Before You Start
English
1
Note: Hard Drive and USB Storage Device are not included.
Cable/DSL
Modem
300Mbps Wireless N
Gigabit Router
(TEW-633GR)
Workstation with
Gigabit PCI Adapter
(TEG-PCITXR)
10/100Mbps Multi-Port
Print Server
(TE100-P21)
Internet
2-Bay SATA I/II Network
Storage Enclosure
(TS-S402)
Printers
10/100Mbps
Gigabit
Notebook with
300Mbps Wireless N
PC Card
(TEW-621PC)
Wireless 300Mbps
?
?
Utility CD-ROM
?
?
Power Cord
?
AC Power Adapter (12V DC, 7.0A)
?
Mounting Brackets
Quick Installation Guide
TS-S402
?
?
A computer with a network adapter properly installed
?
A network Switch or Hub with an available network LAN port
?
A RJ-45 network cable.
?
SATA I/II Hard Drive or USB 2.0 Storage Device (i.e. flash drive, external
hard drive)
?
iTunes (optional)
Web Browser: Internet Explorer (6.0 or higher)
Page 4 / 17
2. Hardware Installation
English
2
4.
Repeat steps 1-3 for a second hard
drive.
3.
Insert the hard drive into one of the
two slots.
Then connect the SATA
data and power cable to the hard
drive.
2.
On the front of the TS-S402, press
push to open up the enclosure
door.
5.
If you have a USB storage device,
connect it to one of the 2 USB
ports on the front or back of the
TS-S402.
1.
Secure the supplied hard drive
brackets to both sides of a 3.5”
SATA hard drive using the provided
screws.
Page 5 / 17
English
3
7.
Connect the power cord to the
power adapter.
Your hardware installation is now complete.
6.
Connect a RJ-45 cable from the
Switch/Hub to the
LAN
port of the
TS-S402.
8.
Connect the External Power
Adapter to the Storage Server and
then to a power outlet.
9.
Press the power button.
10.
Verify that the following panel
lights are on:
Power
,
LAN, HDD.
Register Your Product
To ensure the highest level of customer service and support, please take a moment to
register your product Online at:
www.trendnet.com/registe
r
Thank you for choosing TRENDnet
19216811.live