1. Home
    2. /
  2. Manuals
    3. /
  3. TRENDnet
    4. /
  4. TEW-823DRU
    5. /
  5. 8
Page 36 / 64 Scroll up to view Page 31 - 35
© Copyright 2014 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-823DRU
33
Create schedules
Advanced > Setup > Schedule
For additional security control, your router allows you to create schedules to specify a
time period when a feature on your router should be activated and deactivated. Before
you use the scheduling feature on your router, ensure that your router system time is
configured correctly.
Note:
You can apply a predefined schedule to the following features:
•
Wireless (2.4GHz and 5GHz)
•
Guest Network
•
Parental Control (MAC/IP Filters)
•
Access Control (IP Protocol Filters)
•
Virtual Server
•
Special Applications
•
Gaming
1. Log into your router management page (see “
Access your router management page
”
on page 9).
2. Click on
Advanced
and click on
Setup,
then click on
Schedule
.
3. Review the Schedule settings. Click
Apply
to save settings.
•
Rule Name:
Enter a name for the schedule you would like to apply.
•
Day(s)/Select Day(s):
Check
Select Day(s)
to select the days in the
Select Day(s)
section or select
All Week
to set the schedule for all days.
•
All Day – 24 Hours –
Check the option to set the schedule to 24 hours or define
the schedule under
Start Time
and
End Time.
•
Start/End Time:
Select the start and end time you would like the schedule to
follow.
Note:
The schedule defined will define the time/day the feature will be activated.
Page 37 / 64
© Copyright 2014 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-823DRU
34
Access Control (IP Protocol Filter)
Advanced > Security > Access Control
You may want to block computers or devices on your network access to specific ports
(used or required by a specific application) to the Internet.
Block a specific service or multiple services
1. Log into your router management page (see “
Access your router management page
”
on page 9).
2. Click on
Advanced
and click on
Security,
then click on
Access Control
.
3. Next to
Enable Access Control
, click the
Enable
option.
4. Review the
Add Services Block Rule
. Click
Add
to save the rule.
•
Rule Enable
– Checking this option turns on the Protocol/IP Filter and
unchecking turns it off.
•
Rule Name
– Enter a name for the Protocol/IP Filter.
•
Schedule (Optional) –
The schedule function allows you to define a schedule
when the access control filter should be turned on. T To define a new schedule,
click
New Schedule
and refer to page 33 “
Create Schedules
”. After you have
created a new schedule, click the drop-down list and the new schedule will be
available for selection.
Note:
Before applying scheduling, please ensure your Time
settings are configured correct and you have defined a schedule. See page 32 to
configure
Time Settings
and see page 33 “
Create Schedules
” to create a schedule.
•
Client IP Address Range
– Enter the IP address or IP address range to apply the
protocol/IP filter. (e.g.
192.168.10.20-192.168.10.20
or
192.168.10.20-
192.168.10.30)
.
Note:
The filter will not be applied to IP addresses outside of the range
specified.
To simplify configuration, there is a list of commonly used pre-defined Protocol/IP Filters
to modify otherwise, you can choose to manually add a new Protocol/IP Filter.
•
Service
– Select
Predefined
to select from the predefined services listed or
select
Manually
to specifically enter the TCP or UDP port number or port range
numbers to block. (e.g.
80-80
or
20-21
).
Page 38 / 64
© Copyright 2014 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-823DRU
35
Block all services
1. Log into your router management page (see “
Access your router management page
”
on page 9).
2. Click on
Advanced
and click on
Security,
then click on
Access Control
.
3. Next to
Enable Access Control
, click the
Enable
option.
4. Review the
Add All Services Block Rule
. Click
Add
to save the rule.
•
Rule Enable
– Checking this option turns on the Protocol/IP Filter and
unchecking turns it off.
•
Rule Name
– Enter a name for the Protocol/IP Filter.
•
Schedule (Optional) –
The schedule function allows you to define a schedule
when the access control filter should be turned on. To define a new schedule,
click
New Schedule
and refer to page 33 “
Create Schedules
”. After you have
created a new schedule, click the drop-down list and the new schedule will be
available for selection.
Note:
Before applying scheduling, please ensure your
Time settings are configured correct and you have defined a schedule. See page
32 to configure
Time Settings
and see page 33 “
Create Schedules
” to create a
schedule.
•
Client IP Address Range –
Enter the IP address or IP address range to apply the
protocol/IP filter. (e.g.
192.168.10.20-192.168.10.20
or
192.168.10.20-
192.168.10.30)
.
Note:
The filter will not be applied to IP addresses outside of the range specified.
Note:
In the
Block Rule List
, you can edit a rule by clicking
under the
Edit
column
next to the rule you would like to edit. You can also delete a rule by clicking
under
the
Delete
column next to the rule you would like to delete.
Inbound Filter
Advanced > Security > Inbound Filter
Inbound Filters allows you to allow or deny a specific range of IP addresses. You can
create a predefined range of IP addresses to apply to a specific feature.
Note:
You can apply a predefined inbound filter to the following features:
•
Virtual Server
•
Gaming
•
Remote Management
1. Log into your router management page (see “
Access your router management page
”
on page 9).
2. Click on
Access
, and click on
Inbound Filter
.
3. Review the inbound filter settings. Click
Add
to save the Inbound Filter.
•
Filter Name
– Enter a name for the IP address range.
•
Filter Action –
Select
Allow
to allow the specified IP address range or
Deny
to
deny the specified IP address range.
•
IP Address -
Enter the IP address (e.g.
192.168.1.20-192.168.1.30)
.
Note:
In the
Inbound Filter List
, you can edit a rule by clicking
under the
Edit
column next to the rule you would like to edit. You can also delete a rule by clicking
under the
Delete
column next to the rule you would like to delete.
Page 39 / 64
© Copyright 2014 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-823DRU
36
Open a device on your network to the Internet
This router can provide access to devices on your local area network to the Internet
using the Virtual Server, Special Application, method (DMZ NOT recommended).
DMZ
Advanced > Firewall > DMZ
You may want to expose a specific computer or device on your network to the Internet
to allow anyone to access it. Your router includes the DMZ (Demilitarized Zone) feature
that makes all the ports and services available on the WAN/Internet side of the router
and forwards them to a single IP address (computer or network device) on your
network. The DMZ feature is an easy way of allowing access from the Internet however,
it is a very
insecure
technology and will open local area network to greater threats from
Internet attacks.
It is strongly recommended to use
Virtual Server
(also called port forwarding, see
“
Virtual Server
” on page 36) to allow access to your computers or network devices from
the Internet.
1. Make the computer or network device (for which you are establishing a DMZ link) has
a static IP address. Signing up for a Dynamic DNS service (outlined in
Identify Your
Network
section page 31) will provide identification of the router’s network from the
Internet.
2. Log into your router management page (see “
Access your router management page
”
on page 9).
3. Click on
Advanced
and click
Firewall
, then click on
DMZ
.
4. Click the
DMZ Enable
drop-down list, and select
Enable
.
5. Enter the IP address you assigned to the computer or network device to expose to the
Internet.
6. To save changes, click
Apply
.
Virtual Server
Advanced > Firewall > Virtual Server
Virtual Server (also called port forwarding) allows you to define specific ports (used or
required by a specific application) and forward them to a single IP address (a computer
or device) on your network. Using this feature is more secure compared to using DMZ
(see “
DMZ
” on page 36) in which DMZ forwards all ports instead of only specific ports
used by an application. An example would be forwarding a port to an IP camera
(TRENDnet IP cameras default to HTTP TCP port 80 for remote access web requests) on
your network to be able to view it over the Internet. To open several ports please refer
to “
Gaming
” section on page 39.
Since most ISPs constantly change your home IP address, to be able to access the Virtual
Server port(s) from the Internet it is recommended to setup Dynamic DNS service
(outlined in
Identify Your Network
section page 31).
1. Log into your router management page (see “
Access your router management page
”
on page 9).
2. Click on
Advanced
and click on
Firewall
, then click on
Virtual Server
.
3. Review the virtual server settings. Click
Add
to save settings.
Check the option to the left most of the entry to enable and uncheck to disable.
•
Rule Enable
– Check the option to enable the virtual server.
•
Rule Name
– Enter a name for the virtual server.
•
IP Address:
Enter the IP address of the device to forward the port (e.g.
192.168.10.101)
.
•
Protocol
: Select the protocol required for your device.
TCP
,
UDP,
or
Both
(TCP
and UDP).
•
Public Port –
Enter the port number used to access the device from the Internet.
•
Private Port –
Enter the port number required by your device. Refer to the
connecting device’s documentation for reference to the network port(s) required.
Note:
The Public Port can be assigned a different port number than the Private
Port (also known as port redirection), however it is recommended to use the same
port number for both settings. Please refer to the device documentation to
Page 40 / 64
© Copyright 2014 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-823DRU
37
determine which ports and protocols are required. It is recommended to assign a
static IP address to the device or use DHCP reservation to ensure the IP address of
the device does not change.
•
Inbound Filter:
Select the defined IP address range to allow access. (see “
Inbound
Filter
” section on page 35).
•
Schedule (Optional) –
The schedule function allows you to define a schedule
when the virtual server should be turned on. To define a new schedule, click
New
Schedule
and refer to page 33 “
Create Schedules
”. After you have created a new
schedule, click the drop-down list and the new schedule will be available for
selection.
Note:
Before applying scheduling, please ensure your Time settings are
configured correct and you have defined a schedule. See page 32 to configure
Time Settings
and see page 33 “
Create Schedules
” to create a schedule.
Note:
In the
Virtual Server List
, you can edit a rule by clicking
under the
Edit
column next to the rule you would like to edit. You can also delete a rule by clicking
under the
Delete
column next to the rule you would like to delete.
Example: To forward TCP port 80 to your IP camera
1.
Setup DynDNS service (see
Identify Your Network
section page 31).
2.
Access TRENDnet IP Camera management page and forward Port 80 (see product
documentation)
3.
Make sure to configure your network/IP camera to use a static IP address.
Note:
You may need to reference your camera documentation on configuring a static IP
address.
4. Log into your router management page (see “
Access your router management page
”
on page 9).
5. Click on
Advanced
and click on
Firewall
, then click on
Virtual Server
6. Check the
Rule Enable
option to enable the Virtual Server.
7. Next to
IP Address
, enter the IP address assigned to the camera. (e.g.
192.168.10.101
)
8. Next to
Protocol
, make sure
TCP
is selected in the drop-down list.
10. The
Private Port
and
Public Port
, enter port number
80
is configured for both
settings.
11. To save the changes, click
Add.

Rate

3.5 / 5 based on 2 votes.

Popular TRENDnet Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top