1. Home
    2. /
  2. Manuals
    3. /
  3. TRENDnet
    4. /
  4. TEW-823DRU
    5. /
  5. 11
Page 51 / 64 Scroll up to view Page 46 - 50
© Copyright 2014 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-823DRU
48
Allow/deny ping requests to your router from the Internet
Advanced > Administrator > Advanced Network
To provide additional security, you may want to disable your router from responding to
ping or ICMP (Internet Control Message Protocol) requests from the Internet. A ping is
network communication test to check if a device with IP address is alive or exists on the
network. By disabling this feature, you can conceal your router’s IP address and
existence on the Internet by denying responses to ping requests from the Internet. You
can additionally use this feature as a tool for troubleshooting purposes
1. Log into your router management page (see “
Access your router management page
”
on page 9).
2. Click on
Advanced
and click on
Administrator
, then click on
Advanced Network
.
3. Next to
WAN Ping
, Click the
WAN Ping Respond
drop-down list and
Enable
to allow
your router to respond to ping requests from the Internet. You can also choose
Disable
to block WAN ping requests from the Internet
4. To save changes, click
Apply
.
Note:
If you would like to discard the changes, click
Reset.
Wireless Client List
Advanced > Wireless (2.4GHz or 5GHz) > Station List
You can view the list of active wireless devices currently connected to your router.
1. Log into your router management page (see “
Access your router management page
”
on page 9).
2. Click on
Advanced
and click on
Wireless (2.4GHz or 5GHz)
, then click on
Station List
•
MAC Address:
The current MAC address of your 2.4GHz wireless client.
•
Mode:
Displays the 802.11 mode associated with the client.
•
Rate:
Displays the estimated data rate established with the client.
•
Signal:
Displays the estimated signal strength associated with the client.
.
Page 52 / 64
© Copyright 2014 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-823DRU
49
Check the router system information
Advanced > Administrator > Status
You may want to check the system information of your router such as WAN (Internet)
connectivity, wireless and wired network settings, router MAC address, and firmware
version.
1. Log into your router management page (see “
Access your router management page
”
on page 9).
2. Click on
Advanced
and click on
Administrator
, then click on
Status
System Information
•
Firmware Version
– The current firmware version your router is running.
•
Time:
The current time set on your router.
•
System Up Time
– The duration your router has been running continuously
without a restart/power cycle (hard or soft reboot) or reset.
Internet Configuration
•
Connected Type:
Displays the current WAN connection type applied.
•
WAN IP Address
– The current IP address assigned to your router WAN port or
interface configuration.
•
WAN MAC Address:
Displays the current WAN MAC address.
•
Subnet Mask
- The current subnet mask assigned to your router WAN port or
interface configuration.
•
Default Gateway
– The current gateway assigned to your router WAN port or
interface configuration.
•
Primary/Secondary DNS (Domain Name System)
Server
– The current DNS
address(es) assigned to your router port or interface configuration.
•
DHCP WAN Type:
These buttons will be available in DHCP WAN type only.
o
Renew:
Click this option to renew your WAN IP address.
o
Release:
Click this option to release the WAN IP address of your
router.
•
PPPoE WAN Type:
These buttons will be available in DHCP WAN type only.
o
Connect:
Click this option to connect to your DSL ISP
o
Disconnect:
Click this option to disconnect from your DSL ISP.
Page 53 / 64
© Copyright 2014 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-823DRU
50
LAN Information
•
MAC Address
– The current MAC address of your router’s wireless or interface
configuration.
•
IP Address
- Displays your router’s current IP address.
•
Subnet Mask
– Displays your router’s current subnet mask.
2.4GHz Wireless LAN
•
MAC Address:
The MAC address of your router’s 2.4GHz wireless LAN interface
configuration.
•
Network Name (SSID) / Security Mode:
Displays the current 2.4GHzprimary
wireless network name and security mode assigned to your router.
•
Multiple SSID1 / Security Mode:
Displays the current 2.4GHz wireless network
name and security mode of multiple SSID1 assigned to your router.
•
Multiple SSID2 / Security Mode:
Displays the current 2.4GHz wireless network
name and security mode of multiple SSID2 assigned to your router.
•
Guest Network / Security Mode:
Displays the current 2.4GHz wireless network
name and security mode of the guest network assigned to your router.
5GHz Wireless LAN
•
MAC Address:
The MAC address of your router’s 5GHz wireless LAN interface
configuration.
•
Network Name (SSID) / Security Mode:
Displays the current 5GHzprimary
wireless network name and security mode assigned to your router.
•
Multiple SSID1 / Security Mode:
Displays the current 5GHz wireless network
name and security mode of multiple SSID1 assigned to your router.
•
Multiple SSID2 / Security Mode:
Displays the current 5GHz wireless network
name and security mode of multiple SSID2 assigned to your router.
•
Guest Network / Security Mode:
Displays the current 5GHz wireless network
name and security mode of the guest network assigned to your router.
Page 54 / 64
© Copyright 2014 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-823DRU
51
IPv6 Status
Advanced > Administrator > IPv6 Status
You can view the current IPv6 status on your router.
1. Log into your router management page (see “
Access your router management page
”
on page 9).
2. Click on
Advanced
and click on
Administrator
, then click on
IPv6 Status
View your router log
Advanced > Administrator > System Log
Your router log can be used to obtain activity information on the functionality of your
router or for troubleshooting purposes.
1. Log into your router management page (see “
Access your router management page
”
on page 9).
2. Click on
Advanced
and click on
Administrator
, then click on
System Log.
3. Check the
Enable System Log
option to enable logging. Then click
Apply
. The logging
will display in the log window.
Note:
Clicking
Refresh
will refresh the page to ensure display of the most recent logging
information. Click
Clear
will clear and delete all of the current logging information.
Log Window
Page 55 / 64
© Copyright 2014 TRENDnet. All Rights Reserved.
52
TRENDnet User’s Guide
TEW-823DRU
Router Management Page Structure
BASIC
•
Network Status
•
Wireless
o
2.4GHz Settings & Security
o
5GHz Settings & Security
•
Guest Network
•
Parental Control
o
MAC/IP Address Filter
o
Website Filter
ADVANCED
•
Administrator
o
Status
o
IPv6 Status
o
System Log
o
Advanced Network
UPnP
o
Settings Management
Export/Import configuration
Reset to factory default
Reboot
o
Time
•
Setup
o
LAN Settings
IP Address Setting
DHCP Server Setting
DHCP Reservation
o
WAN Settings
o
Routing
o
IPv6 Settings
o
Schedule
o
Firmware
o
Management
Administrator Password
Dynamic DNS
Remote Management
o
DHCP Client List
o
Wizard
•
Wireless 2.4GHz
o
Advanced
o
Multiple SSID
o
MAC Filter (Wireless)
o
WPS
o
Station List
•
Wireless 5GHz
o
Advanced
o
Multiple SSID
o
MAC Filter (Wireless)
o
WPS
o
Station List
•
Security
o
Access Control (IP Protocol Filter)
o
Inbound Filter
•
Firewall
o
DMZ
o
Virtual Server
o
Special Applications
o
Gaming
o
ALG
•
USB
o
File Sharing Server
o
FTP Server

Rate

3.5 / 5 based on 2 votes.

Popular TRENDnet Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top