TRENDnet TEW-823DRU Router Manual PDF (Setup & Configuration Guide)

Home

Manuals

TRENDnet

TEW-823DRU

Page 56 / 64 Scroll up to view Page 51 - 55

TRENDnet User’s Guide

TEW-823DRU

Technical Specifications

Standards

•

IEEE 802.3

•

IEEE 802.3u

•

IEEE 802.3x

•

IEEE 802.3ab

•

IEEE 802.3az

•

IEEE 802.11a

•

IEEE 802.11b

•

IEEE 802.11g

•

IEEE 802.11n (2.4 GHz 450 Mbps, 5 GHz up to 450 Mbps)

•

IEEE 802.11ac (draft 2.0, up to 1300 Mbps)

Hardware Interface

•

4 x Gigabit LAN ports

•

1 x Gigabit WAN port

•

1 x USB 2.0 (Storage FTP, Samba)

•

Power switch

•

WPS button

•

Reset button

•

LED indicators

Special Features

•

Multi-Language interface: English, French, Spanish, German, Russian

•

Pre-encrypted wireless network

•

IPv6 support

•

1 guest network per band with option for internet access only

•

Up to 2 additional SSIDs per band

•

Dynamic DNS support for dyn.com, no-ip.com, and easydns.com

•

Samba/FTP server support

•

Implicit and Explicit Beamforming

Access Control

•

Wireless encryption up to WEP, WPA/WPA2-PSK, WPA/WPA2-RADIUS

•

Firewall: NAT, SPI, Virtual Server, Special Applications, Gaming, DMZ Host,

allow/deny ping request from internet

•

ALG: PPTP/L2TP/IPsec VPN Passthrough, TFTP/FTP/RTSP/SIP/H.323

Passthrough

•

Parental (Access) Controls: MAC, URL, IP Filter

Quality of Service

•

WMM

•

Inbound/outbound 5 priority queues

Internet Connection Types

•

Dynamic IP (DHCP)

•

Static IP (Fixed)

•

PPPoE (Dynamic IP/Static IP)

•

PPTP (Dynamic IP/Static IP)

•

L2TP(Dynamic IP/Static IP)

•

Russia PPPoE (Dynamic IP/Static IP)

•

Russia PPTP (Dynamic IP/Static IP)

•

Russia L2TP (Dynamic IP/Static IP)

•

IPv6 (Static, Auto-configuration (SLAAC/DHCPv6), Link-Local, PPPoE, 6to4)

Management/Monitoring

•

Local/remote web based management

•

Upgrade firmware

•

Backup/restore configuration

•

Internal logging

•

Reboot

•

Restore to factory defaults

•

Ping test

Routing

•

Static

Page 57 / 64

TRENDnet User’s Guide

TEW-823DRU

•

Dynamic (RIP v1/2)

Frequency

•

2.412 - 2.472 GHz

•

5.180 – 5.825 GHz

Modulation

•

802.11b: CCK, DQPSK, DBPSK

•

802.11a/g: OFDM with BPSK, QPSK and 16/64-QAM

•

802.11n: BPSK, QPSK, 16-QAM, 64-QAM with OFDM

•

802.11ac: OFDM with BPSK, QPSK and 16/64/256-QAM

Media Access Protocol

•

CSMA/CA with ACK

Antenna Gain

•

2.4 GHz: 3 x 2 dBi (max.) internal/5 GHz: 3 x 3 dBi (max.) internal

Wireless Output Power/Receiving Sensitivity

•

802.11a: 20 dBm (max.)/-65 dBm (typical) @ 54 Mbps

•

802.11b: 23 dBm (max.)/-83 dBm (typical) @ 11 Mbps

•

802.11g: 23 dBm (max.)/-65 dBm (typical) @ 54 Mbps

•

802.11n (2.4 GHz): 22 dBm (max.)/-61 dBm (typical) @ 450 Mbps

•

802.11n (5 GHz): 20 dBm (max.)/-61 dBm (typical) @ 450 Mbps

•

802.11ac: 20 dBm (max.)/-51 dBm (typical) @ 1300 Mbps

Wireless Channels

•

2.4 GHz: FCC: 1-11; ETSI: 1-13

•

5 GHz: FCC: 36, 40, 44, 48, 149, 153, 157, 161, 165; ETSI: 36, 40, 44, 48, 52, 56,

60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140

Power

•

Input: 100 – 240 V AC, 50 - 60 Hz, 0.8 A

•

Output: 12 V DC, 2 A external power adapter

•

Consumption: 18 Watts max.

Operating Temperature

•

0 – 40 °C (32 – 104 °F)

Operating Humidity

•

Max. 95% non-condensing

Certifications

•

FCC

Dimensions

•

72 x 151 x 191 mm (2.8 x 6 x 7.5 in)

Weight

•

408 g (14.4 oz.)

*For maximum performance of up to 867 Mbps use with an 867 Mbps 802.11ac wireless adapter.

**Maximum wireless signal rates are referenced from IEEE 802.11 theoretical specifications.

Actual data throughput and coverage will vary depending on interference, network traffic,

building materials and other conditions.

Page 58 / 64

TRENDnet User’s Guide

TEW-823DRU

Troubleshooting

Q: I typed

http://tew-823dru

in my Internet Browser Address Bar, but an error

message says “The page cannot be displayed.” How can I access the router

management page?

Answer:

Access the router using the default IP address 192.168.10.1.

http://192.168.10.1

Q: I typed http://192.168.10.1 in my Internet Browser Address Bar, but an error

message says “The page cannot be displayed.” How can I access the router

management page?

Answer:

1. Check your hardware settings again. See “

Router Installation

” on page 8.

2. Make sure the LAN and WLAN lights are lit.

3. Make sure your network adapter TCP/IP settings are set to

Obtain an IP address

automatically

DHCP

(see the steps below).

4. Make sure your computer is connected to one of the router’s LAN ports

5. Press on the factory reset button for 15 seconds, the release.

Windows 7/8/8.1

a. Go into the

Control Panel

, click

Network and Sharing Center

b. Click

Change Adapter Settings

, right-click the

Local Area Connection

icon.

c. Then click

Properties

and click

Internet Protocol Version 4 (TCP/IPv4)

d. Then click

Obtain an IP address automatically

and click

Windows Vista

a. Go into the

Control Panel

, click

Network and Internet

b. Click

Manage Network Connections,

right-click the

Local Area Connection

icon and click

Properties

c. Click

Internet Protocol Version (TCP/IPv4)

and then click

Properties

d. Then click

Obtain an IP address automatically

and click

Windows XP/2000

a. Go into the

Control Panel

, double-click the

Network Connections

icon

b. Right-click the

Local Area Connection

icon and the click

Properties

c. Click

Internet Protocol (TCP/IP)

and click

Properties

d. Then click

Obtain an IP address automatically

and click

Note:

If you are experiencing difficulties, please contact your computer or operating

system manufacturer for assistance.

Q: I am not sure what type of Internet Account Type I have for my Cable/DSL

connection. How do I find out?

Answer:

Contact your Internet Service Provider (ISP) for the correct information.

Q: The Wizard does not appear when I access the router. What should I do?

Answer:

1. Click on Wizard on the left hand side.

2. Near the top of the browser, “Pop-up blocked” message may appear. Right click on

the message and select Always Allow Pop-ups from This Site.

3. Disable your browser's pop up blocker.

Q: I went through the Wizard, but I cannot get onto the Internet. What should I do?

Answer:

1. Verify that you can get onto the Internet with a direct connection into your modem

(meaning plug your computer directly to the modem and verify that your single

computer (without the help of the router) can access the Internet).

2. Power cycle your modem and router. Unplug the power to the modem and router.

Wait 30 seconds, and then reconnect the power to the modem. Wait for the modem to

fully boot up, and then reconnect the power to the router.

3. Contact your ISP and verify all the information that you have in regards to your

Internet connection settings is correct.

Q: I cannot connect wirelessly to the router. What should I do?

Answer:

1. Double check that the WLAN light on the router is lit.

2. Power cycle the router. Unplug the power to the router. Wait 15 seconds, then plug

the power back in to the router.

3. Contact the manufacturer of your wireless network adapter and make sure the

wireless network adapter is configured with the proper SSID. The preset SSID is

TRENDnet(

model_number)

4. To verify whether or not wireless is enabled, login to the router management page,

click on

Wireless

5. Please see “

Steps to improve wireless connectivity

” on page 20 if you continue to

have wireless connectivity problems.

Page 59 / 64

TRENDnet User’s Guide

TEW-823DRU

Appendix

How to find your IP address?

Note:

Please note that although the following procedures provided to follow for your

operating system on configuring your network settings can be used as general

guidelines, however, it is strongly recommended that you consult your computer or

operating system manufacturer directly for assistance on the proper procedure for

configuring network settings.

Command Prompt Method

Windows 2000/XP/Vista/7/8/8.1

1. On your keyboard, press

Windows Logo+R

keys simultaneously to bring up the Run

dialog box.

2. In the dialog box, type

cmd

to bring up the command prompt.

3. In the command prompt, type

ipconfig /all

to display your IP address settings.

MAC OS X

1. Navigate to your

Applications

folder and open

Utilities

2. Double-click on

Terminal

to launch the command prompt.

3. In the command prompt, type

ipconfig getifaddr

to display the wired

or wireless IP address settings

Note: en0

is typically the wired Ethernet and

en1

is typically the wireless Airport

interface.

Graphical Method

MAC OS 10.6/10.5

1. From the Apple menu, select

System Preferences

2. In System Preferences, from the

View

menu, select

Network

3. In the Network preference window, click a network port (e.g., Ethernet, AirPort,

modem). If you are connected, you'll see your IP address settings under "Status:"

MAC OS 10.4

1. From the Apple menu, select

Location

, and then

Network Preferences

2. In the Network Preference window, next to "Show:", select

Network Status

. You'll see

your network status and your IP address settings displayed.

Note:

If you are experiencing difficulties, please contact your computer or operating

system manufacturer for assistance.

How to configure your network settings to obtain an IP address automatically or use

DHCP?

Note:

Please note that although the following procedures provided to follow for your

operating system on configuring your network settings can be used as general

guidelines, however, it is strongly recommended that you consult your computer or

operating system manufacturer directly for assistance on the proper procedure for

configuring network settings.

Windows 7/8/8.1

a. Go into the

Control Panel

, click

Network and Sharing Center

b. Click

Change Adapter Settings

, right-click the

Local Area Connection

icon.

c. Then click

Properties

and click

Internet Protocol Version 4 (TCP/IPv4)

d. Then click

Obtain an IP address automatically

and click

Windows Vista

a. Go into the

Control Panel

, click

Network and Internet

b. Click

Manage Network Connections,

right-click the

Local Area Connection

icon and click

Properties

c. Click

Internet Protocol Version (TCP/IPv4)

and then click

Properties

d. Then click

Obtain an IP address automatically

and click

Windows XP/2000

a. Go into the

Control Panel

, double-click the

Network Connections

icon

b. Right-click the

Local Area Connection

icon and the click

Properties

c. Click

Internet Protocol (TCP/IP)

and click

Properties

d. Then click

Obtain an IP address automatically

and click

MAC OS 10.4/10.5/10.6

a. From the

Apple

, drop-down list, select

System Preferences

b. Click the

Network

icon.

c. From the

Location

drop-down list, select

Automatic

d. Select and view your Ethernet connection.

In MAC OS 10.4, from the

Show

drop-down list, select

Built-in

Ethernet

and select the

TCP/IP

tab.

In MAC OS 10.5/10.6, in the left column, select

Ethernet

e. Configure TCP/IP to use DHCP.

Page 60 / 64

TRENDnet User’s Guide

TEW-823DRU

In MAC 10.4, from the

Configure IPv4

, drop-down list, select

Using

DHCP

and click the

Apply Now

button.

In MAC 10.5, from the

Configure

drop-down list, select

Using DHCP

and click the

Apply

button.

In MAC 10.6, from the

Configure

drop-down list, select

Using DHCP

and click the

Apply

button.

f. Restart your computer.

Note:

If you are experiencing difficulties, please contact your computer or operating

system manufacturer for assistance.

How to find your MAC address?

In Windows 2000/XP/Vista/7,

Your computer MAC addresses are also displayed in this window, however, you can type

getmac

–v

to display the MAC addresses only.

In MAC OS 10.4,

Apple Menu > System Preferences > Network

2. From the

Show

menu, select

Built-in Ethernet

3. On the

Ethernet

tab, the

Ethernet ID

is your MAC Address.

In MAC OS 10.5/10.6,

Apple Menu > System Preferences > Network

2. Select

Ethernet

from the list on the left.

3. Click the

Advanced

button.

3. On the

Ethernet

tab, the

Ethernet ID

is your MAC Address.

How to connect to a wireless network using the built-in Windows utility?

Note:

Please note that although the following procedures provided to follow for your

operating system on configuring your network settings can be used as general

guidelines, however, it is strongly recommended that you consult your computer or

operating system manufacturer directly for assistance on the proper procedure for

connecting to a wireless network using the built-in utility.

Windows 7/8/8.1

1. Open Connect to a Network by clicking the network icon (

) in the notification

area.

2. In the list of available wireless networks, click the wireless network you would like to

connect to, then click

Connect.

4. You may be prompted to enter a security key in order to connect to the network.

5. Enter in the security key corresponding to the wireless network, and click

Windows Vista

1. Open Connect to a Network by clicking the

Start Button

and then click

Connect

To.

2. In the

Show

list, click

Wireless

3. In the list of available wireless networks, click the wireless network you would like to

connect to, then click

Connect.

4. You may be prompted to enter a security key in order to connect to the network.

5. Enter in the security key corresponding to the wireless network, and click

Windows XP

1. Right-click the network icon in the notification area, then click

View Available

Wireless Networks

2. In

Connect to a Network

, under

Available Networks

, click the wireless network you

would like to connect to.

3. You may be prompted to enter a security key in order to connect to the network.

4. Enter in the security key corresponding to the wireless network, and click

Connect

Rate

Popular TRENDnet Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share