TRENDnet TEW-658BRM Router Manual PDF (Setup & Configuration Guide)

Given below is full router user manual of TRENDnet TEW-658BRM router model. You can also download this manual in PDF Format to read later on your computer.

Product user manuals come handy in case you want to know all functionalities of your device, troubleshooting, fist time configuration & setup and in many other situations.

Page 1 / 24
TEW-658BRM
1.01
Quick Installation Guide
Page 2 / 24
Table of Contents
Version 02.14.2011
English
1
1. Before You Start
2. Hardware Installation
7
3. Configure the Modem
8
1
Troubleshooting
13
Wireless Tips
16
Page 3 / 24
1. Before You Start
Ÿ
Ÿ
A computer with a wired or wireless network adapter properly installed.
Ÿ
Web Browser such as Internet Explorer 6.0 and above, Firefox 2.0 and above or
Chrome
A working ADSL Internet Connection
Package Contents
Ÿ
Ÿ
CD-ROM (User's Guide)
Ÿ
Multi-Language Quick Installation Guide
Ÿ
Network Cable
(1.5m/4.9ft)
Ÿ
RJ-11 Telephone Cable (1m/3ft)
Ÿ
Power Adapter (12V DC, 1A)
TEW-658BRM
System Requirements
1
Page 4 / 24
2
Please verify your DSL Internet broadband connection type with your ISP and ensure
you have all the information for one of the following connection types:
1. PPPoE (RFC-2516 PPP over Ethernet)
Ÿ
VPI: _____ (0~255)
Ÿ
VCI: _____ (32~65535)
Ÿ
Encapsulation (LLC or VCMUX)
Ÿ
ATMQoS (UBR, CBR, VBR-nrt, VBR-rt)
Ÿ
Peak Cell Rate: _____
(0~6000 cells/s)
Ÿ
Maximum Burst Size: _____ (0-65535 Cells)(VBR-nrt/VBR-rt ATMQoS only)
Ÿ
Sustainable Cell Rate: _____ (0~65535 cells)(VBR-nrt/VBR-rt ATMQoS only)
Ÿ
Enable Default VLAN (Enable/Disable)
Ÿ
PPPoE PassThrough (Enable/Disable)
Ÿ
State of Connection (Enable/Disable)
Ÿ
IPMode of Connection (Dynamic/Static)
Ÿ
IP Address: _____. _____._____._____ (Static IPMode only)
Ÿ
Subnet Mask: _____. _____._____._____
(Static IPMode only)
Ÿ
Name: ________________
Ÿ
NAT (Enable/Disable)
Ÿ
User Name: ___________________________
Ÿ
User Password: ________________
Ÿ
Confirm Password: ________________
Ÿ
Max MRU: _____ (576~1492)
Ÿ
DNS Enabled (Enable/Disable)
Ÿ
DNS Override Allowed (Enable/Disable)
Ÿ
DNS Server 1: _____. _____._____._____ (optional)
Ÿ
DNS Server 2: _____. _____._____._____ (optional)
Ÿ
PPPoE Service Name: ________________ (optional)
Ÿ
Mac Address: ________________
Ÿ
PPPoE AC Name:________________ (optional)
Ÿ
Connection Trigger (OnDemand/ AlwayOn/ Manual)
Ÿ
Idle Disconnect Time (30~3600 seconds)
Ÿ
As system default route (Current setting : pppoe )
(Setup
"
Internet Setup)
Ÿ
ICMP Reply Enable (Setup
"
Internet Setup)
Ÿ
LCP Interval
(0~86400 seconds)
Ÿ
Proxy ARP Enable
Collect Internet Service Provider (ISP) Information
Page 5 / 24
3
2. PPPoA (RFC-2364 PPP over ATM)
Ÿ
VPI: _____ (0~255)
Ÿ
VCI: _____ (32~65535)
Ÿ
Encapsulation (LLC or VCMUX)
Ÿ
ATMQoS (UBR, CBR, VBR-nrt, VBR-rt)
Ÿ
Peak Cell Rate: _____
(0~6000 cells/s)
Ÿ
Maximum Burst Size: _____
(0-65535 Cells)(VBR-nrt/VBR-rt ATMQoS only)
Ÿ
Sustainable Cell Rate: _____
(0~65535 cells)(VBR-nrt/VBR-rt ATMQoS only)
Ÿ
Enable Default VLAN (Enable/Disable)
Ÿ
PPPoE PassThrough (Enable/Disable)
Ÿ
State of Connection
(Enable/Disable)
Ÿ
IPMode of Connection (Dynamic/Static)
Ÿ
IP Address: _____. _____._____._____
Ÿ
Subnet Mask: _____. _____._____._____
Ÿ
Name: ________________
Ÿ
NAT (Enable/Disable)
Ÿ
User Name:________________
Ÿ
User Password: ________________
Ÿ
Confirm Password: ________________
Ÿ
Max MRU: _____
(576~1492)
Ÿ
DNS Enabled (Enable/Disable)
Ÿ
DNS Override Allowed (Enable/Disable)
Ÿ
DNS Server 1: _____. _____._____._____ (optional)
Ÿ
DNS Server 2: _____. _____._____._____ (optional)
Ÿ
Connection Trigger (OnDemand/ AlwayOn/ Manual)
Ÿ
Idle Disconnect Time
(30~3600 seconds)
Ÿ
LCP Interval: _____
(0~86400 seconds)
Ÿ
As system default route
(Current setting : pppoe ) (Setup
"
Interent Setup)
Ÿ
ICMP Reply Enable
(Setup
"
Interent Setup)
Ÿ
Proxy ARP Enable
3. IPoA (RFC-1483 Routed)
Ÿ
VPI: _____ (0~255)
Ÿ
VCI: _____ (32~65535)
Ÿ
Encapsulation (LLC or VCMUX)
Ÿ
ATMQoS (UBR, CBR, VBR-nrt, VBR-rt)
Ÿ
Peak Cell Rate: _____
(0~6000 cells/s)
Ÿ
Maximum Burst Size: _____
(0-65535 Cells)(VBR-nrt/VBR-rt ATMQoS only)
Ÿ
Sustainable Cell Rate: _____
(0~65535 cells)(VBR-nrt/VBR-rt ATMQoS only)
Ÿ
Enable Default VLAN (Enable/Disable)
Ÿ
PPPoE PassThrough (Enable/Disable)

Rate

4 / 5 based on 1 vote.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top