Page 6 / 18
Scroll up to view Page 1 - 5
ENGLISH
FRANÇAIS
DEUTSCH
ESPAÑOL
ÐÓÑÑÊÈÉ
4
Using the TEW-653AP with the TPE-111GI
1.
Connect the
Power Cord
to the
Power
Adapter.
2.
Connect the
Power Adapter
to the
DC 48V IN
connector on the TPE-111GI.
Then connect
the
Power Cord
to an outlet.
4.
Connect a CAT-5 cable from the TEW-653AP's
LAN
port to the TPE-111GI's
PoE Out
port.
3.
Connect a CAT-5 cable from a switch to the
TPE-111GI's
DATA IN
port.
5.
Verify that the wireless, LAN and power LEDs
are on.
Please refer to step 4 in the Hardware
Installation section.
Page 7 / 18
ENGLISH
FRANÇAIS
DEUTSCH
ESPAÑOL
ÐÓÑÑÊÈÉ
5
4. Configure the Access Point
Note
: It is recommended that you configure the Access Point from a wired computer.
Before the Access Point can be configured, a Static IP address must be assigned to
your computer's network adapter in the subnet of 192.168.10.X.
Since the Access
Point's default IP address is
192.168.10.100, make sure no other network devices are
(Refer to Troubleshooting section on how to
configure TCP/IP settings on your PC.)
1.
Open your web browser, type
in the Address bar, and
then press
Enter
.
2.
Enter the User name and Password, and then
click
OK
. By default:
User Name:
admin
Password:
admin
3.
Click
Wizard
.
Page 8 / 18
ENGLISH
FRANÇAIS
DEUTSCH
ESPAÑOL
ÐÓÑÑÊÈÉ
6
Note:
1. To protect your network from any unauthorized access it is recommended to enable
wireless encryption.
2. The examples below are for WPA2-PSK security.
If you select WPA-PSK or
WPA2-PSK, make sure your wireless adapters support WPA or WPA2.
If your
wireless adapters do not support WPA or WPA2, then select WEP.
4.
Click
Next
.
5.
Select
AP Mode
and then click
Next
.
6.
Use your mouse to select the desired security
level (lowest for no encryption, highest for
WPA2-PSK).
7.
Enter the desired
SSID
and
Key
.
Then click
Next
.
By default, the SSID is TRENDnet653.
8.
Setup is successful.
Click
Reboot
.
Page 9 / 18
ENGLISH
FRANÇAIS
DEUTSCH
ESPAÑOL
ÐÓÑÑÊÈÉ
7
9.
Wait 24 seconds while the Access Point
reboots.
Your configuration is complete
Register Your Product
To ensure the highest level of customer service and support, please take a moment to
register your product Online at:
www.trendnet.com/registe
r
Thank you for choosing TRENDnet
For detailed information regarding the
TEW-653AP’s
configuration and advanced settings,
please refer to the Troubleshooting section, User's Guide CD-ROM, or TRENDnet's website
10.
Click
System -> LAN
.
Configure the LAN
settings to match your network settings and
then click
Apply
.
11.
Wait 14 seconds while the Access Point
reboots.
Page 10 / 18
ENGLISH
FRANÇAIS
DEUTSCH
ESPAÑOL
ÐÓÑÑÊÈÉ
8
1.
Use the mounting plate as a template and mark
the wall for the correct screw position.
2.
Drill holes for the screws at the marked
positions on the wall.
5. Mounting
3.
Use the provided wood screws to secure the
mounting plate to the wall.
5.
Follow the arrow to secure the TEW-653AP to
the mounting plate.
4.
Align the TEW-653AP with the mounting plate
19216811.live