1. Home
    2. /
  2. Manuals
    3. /
  3. TRENDnet
    4. /
  4. TEG-2248WS
    5. /
  5. 5
Page 21 / 46 Scroll up to view Page 16 - 20
System word definitions in the Discovery List:
z
MAC Address:
Shows the device MAC Address.
z
IP Address:
Shows the current IP address of the device.
z
Protocol version:
Shows the version of the Utility protocol.
z
Product Name:
Shows the device product name.
z
System Name:
Shows the appointed device system name.
z
Location:
Shows where the device is located.
z
Trap IP:
Shows the IP where the Trap to be sent.
z
Subnet Mask:
Shows the Subnet Mask set of the device.
z
Gateway:
Shows the Gateway set of the device.
Monitor List
All the Web Smart Device in the Monitor List can be monitored; you
can also receive the trap and show the status of the device.
System word definitions in the Monitor List:
z
S:
Shows the system symbol of the Web-Smart device,
represent for device system is not alive.
z
IP Address:
Shows the current IP address of the device.
z
MAC Address:
Shows the device MAC Address.
z
Protocol version:
Shows the version of the Utility protocol.
z
Product Name:
Shows the device product name.
z
System Name:
Shows the appointed device system name.
z
Location:
Shows where the device is located.
z
Trap IP:
Shows the IP where the Trap to be sent.
z
Subnet Mask:
Shows the Subnet Mask set of the device.
z
Gateway:
Shows the Gateway set of the device.
20
Downloaded from
www.Manualslib.com
manuals search engine
Page 22 / 46
View Trap:
The Trap function can receive the events that happen
from the Web Management Switch in the Monitor List.
There is a light indicator behind the
“View Trap”
button, when the
light indicates in green, it means that there is no trap transmitted, and
else when it indicates in red, it means that there is new trap
transmitted, this is to remind us to view the trap. (Figure 7)
Figure 7.
When the
“View Trap”
button is clicked, a Trap Information window
will pop out, it will show the trap information including the Symbol,
Time, Device IP and the Event occured. (Figure 8)
The symbol “
” represents the trap signal arise, this symbol will
disappear after you review and click on the event record.
Figure 8.
Note: In order to receive Trap information, switch has to be configured with
Trap IP and Trap Events in Web browser, which are available in the Trap
Setting Menu (see Page 40 for detail).
Add Item:
To add a device to the Monitor List manually, enter the IP
Address of the device that you want to monitor.
Delete Item:
To delete the device in the Monitor List.
21
Downloaded from
www.Manualslib.com
manuals search engine
Page 23 / 46
Device Setting
You can set the device by using the function key in the Device Setting
Dialog box.
Configuration Setting:
In this Configuration Setting, you can set the
IP Address, Subnet Mask, Gateway, Set Trap to (Trap IP Address),
System name and Location.
Select the device in the Discovery list or Monitor List and press this
button, then the Configuration Setting window will pop out as Figure
9, after filling up the data that you want to change, you must fill up the
password and press the “Set” to process the data changed immediately.
The factory default password is
"admin".
Figure 9. Configuration Setting
Password Change:
You can use this Password Change when you
need to change the password, fill in the password needed in the dialog
box and press
“Set”
button to proceed the password change
immediately.
22
Downloaded from
www.Manualslib.com
manuals search engine
Page 24 / 46
Figure 10. Password Change
Firmware Upgrade:
When the device has a new function, there will
be a new firmware to update the device, use this function to update.
Figure 11.
Web Access:
Double click the device in the Monitor List or select a
device in the Monitor List and press this
“Web Access”
button to
access the device in Web browser.
23
Downloaded from
www.Manualslib.com
manuals search engine
Page 25 / 46
Toolbar
The toolbar in the Web Management Utility have four main tabs, File,
View, Options and Help.
In the
“File TAB”
, there are Monitor Save, Monitor Save As, Monitor
Load and Exit.
Monitor Save:
To record the setting of the Monitor List to the
default, when you open the Web Management Utility next time, it
will auto load the default recorded setting.
Monitor Save As:
To record the setting of the Monitor List in
appointed filename and file path.
Monitor Load:
To manually load the setting file of the Monitor List.
Exit:
To exit the Web Management Utility.
In the
“View TAB”
, there are view log and clear log function, this
function will help you to show trap setting.
View Log:
To show the event of the Web Management Utility and
the device.
Clear Log:
to clear the log.
In the
“Option TAB”
, there are Refresh Time function, this function
helps you to refresh the time of monitoring the device. Choose
15 secs,
30 secs, 1 min, 2 min and 5 min
to select the time of monitoring.
In the
“Help TAB”
, there is About function, it will show out the
version of the Web Management Utility.
24
Downloaded from
www.Manualslib.com
manuals search engine

Rate

3.5 / 5 based on 2 votes.

Popular TRENDnet Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top