Page 16 / 46
Scroll up to view Page 11 - 15
UNDERSTANDING LED INDICATORS
The front panel LEDs provides instant status feedback, and, helps
monitor and troubleshoot when needed.
Figure 5. LED indicators of the Switch
Power and System LEDs
POWER: Power Indicator
On
:
When the Power LED lights on, the Switch is receiving power.
Off
:
When the Power turns off or the power cord has improper connection.
SYSTEM: Management Indicator
Blinking
:
When the CPU is working, the System LED is blinking.
On/Off
: The CPU is not working.
15
Downloaded from
www.Manualslib.com
manuals search engine
Page 17 / 46
Ports 1~48 10/100M Status LEDs
Link/ACT: Link/Activity
On
:
When the Link/ACT LED lights on, the respective port is successfully
connected to an Ethernet network.
Blinking
: When the Link/ACT LED is blinking, the port is transmitting or
receiving data on the Ethernet network.
Off
: No link.
Ports 49~50 Gigabit Status LEDs
Link/ACT: Link/Activity
On
:
When the Link/ACT LEDA lights on, the respective port is successfully
connected to an Ethernet network.
Blinking
: When the Link/ACT LED is blinking, the port is transmitting or
receiving data on the Ethernet network.
Off
: No link.
SPEED:
On
(Green)
: When the green light is on, the respective port is connected to a
1000Mbps Gigabit Ethernet network.
On
(Amber)
When the Amber light is on, the respective port is connected to a
100Mbps Fast Ethernet network.
Off
: When the respective port is connected to a 10Mbps Ethernet or No link
16
Downloaded from
www.Manualslib.com
manuals search engine
Page 18 / 46
Ports 51~ 52 mini-GBIC Status LEDs
Link/ACT: Link/Activity
On
: When the mini-GBIC module is installed and connected to a network,
the Link/ACT LED lights on.
Blinking
: When the LED is blinking, the mini-GBIC module is receiving data on a
network.
Off
: No link.
17
Downloaded from
www.Manualslib.com
manuals search engine
Page 19 / 46
CONFIGURATION
Through the Web Browser you can configure the Switch such as
VLAN, Trunking, QoS… etc.
With the attached Web Management Utility, you can easily discover
all the Web Management Switch, assign the IP Address, changing the
password and upgrading the new firmware.
Installing the Web Management Utility
The following gives instructions guiding you through the installations
of the Web Management utility.
1.
Insert the Utility CD in the CD-Rom Drive.
2.
From the
Start
menu on the Windows desktop, choose
Run
.
3.
In
the
Run
dialog
box,
type
D:\Web
Management
Utility\setup.exe (D:\ depends where your CD-Rom drive is
located) and click
OK
.
4.
Follow the on-screen instructions to install the utility.
5.
Upon
completion,
go
to
Program
Files
->
web_management_utility
and execute the Web Management
utility. (Figure 6.)
18
Downloaded from
www.Manualslib.com
manuals search engine
Page 20 / 46
Figure 6. Web Management Utility
The Web Management Utility was divided into four parts,
Discovery
List, Monitor
List, Device Setting
and
Toolbar function
, for details
instruction, follow the below section.
Discovery List
This is the list where you can discover all the Web management
devices in the entire network.
By pressing the
“Discovery”
button, you can list all the Web
Management devices in the discovery list.
Double click or press the
“Add to monitor list”
button to select a
device from the Discovery List to the Monitor List.
19
Downloaded from
www.Manualslib.com
manuals search engine
19216811.live