Page 31 / 159
Scroll up to view Page 26 - 30
28
3 MANUAL INSTALLATION
DMS-CTC-20120510-0000 v1.0
3.5.1
Managing your Mobile Connection with the
MediaAccess Gateway GUI
Introduction
You can view and manage the parameters of your mobile connection via the MediaAccess Gateway GUI.
Procedure
To manage your mobile USB connection via the MediaAccess Gateway GUI:
1
Browse to the MediaAccess Gateway GUI.
For more information, see
“4.1.1 Access” on page 33
.
2
On the
Broadband Connection
menu, click
Internet Services
.
3
Click
View more...
for the mobile USB connection. The
Overview
page of the mobile USB connection is shown.
4
In the location bar, click
Configure
. The
Configure
page of the mobile connection appears.
5
Under
Mobile Information
, update the following fields if necessary:
APN
:
The public APN used to access the Internet, or the private APN to access a local network.
Operator Mode
:
2G / 3G / automatic (let the MediaAccess Gateway choose the best operator mode)
Pin
:
The PIN code of your SIM card.
6
Click
Apply
to apply your configuration changes.
Configuration changes via the MediaAccess Gateway GUI are automatically saved.
Page 32 / 159
29
3 MANUAL INSTALLATION
DMS-CTC-20120510-0000 v1.0
3.5.2
Inserting a Mobile USB Adapter
Procedure
Once the mobile connection is configured you can proceed as follows to insert the mobile USB adapter:
1
Power off the MediaAccess Gateway.
2
Insert your SIM card into the mobile USB adapter.
3
Plug the mobile USB adapter in (one of) the USB port(s) of your MediaAccess Gateway:
4
Power on the MediaAccess Gateway.
If you do not power off the MediaAccess Gateway first, the mobile USB adapter will not be detected.
Page 33 / 159
31
4 CONFIGURATION TOOLS
DMS-CTC-20120510-0000 v1.0
4
Configuration Tools
Configuration Tools
You can use the following tools to configure your MediaAccess Gateway:
The
MediaAccess Gateway
Setup CD allows you to configure your MediaAccess Gateway and helps you to connect
your computers to the MediaAccess Gateway. For more information, see
“2 Guided Installation” on page 15
.
The
MediaAccess Gateway GUI
allows you to configure your MediaAccess Gateway via your web browser.
For more information, see
“4.1 MediaAccess Gateway GUI” on page 32
.
Page 34 / 159
32
4 CONFIGURATION TOOLS
DMS-CTC-20120510-0000 v1.0
4.1
MediaAccess Gateway GUI
Introduction
The MediaAccess Gateway Graphical User Interface (GUI) allows you to configure your MediaAccess Gateway using your
web browser.
Requirements
JavaScript must be enabled on your browser (this is the default setting). For more information, consult the help of your web
browser.
Page 35 / 159
33
4 CONFIGURATION TOOLS
DMS-CTC-20120510-0000 v1.0
4.1.1
Access
Accessing the MediaAccess Gateway GUI
Proceed as follows:
1
Open your web browser.
2
Browse to http://dsldevice.lan
or to the IP address of your MediaAccess Gateway (by default:
192.168.1.254).
3
If you have protected your MediaAccess Gateway with a user name and password, the MediaAccess Gateway will
prompt you to enter these. Enter your user name and password and click
OK
.
4
The
MediaAccess Gateway GUI
appears.
Access the MediaAccess Gateway via UPnP
You can also access the MediaAccess Gateway GUI using the Internet Gateway Device (IGD) icon if your computer runs
one of the following operating systems:
Microsoft Windows 7
Microsoft Windows Vista
Microsoft Windows XP
For more information, see
“9.1 UPnP” on page 78
.
Remote access
It is also possible to access the MediaAccess Gateway GUI from the Internet. For more information, see
“4.3 Access From
the Internet” on page 38
.
For more information, see
“4.1.3 Protecting Access to the MediaAccess Gateway” on page 36
.
19216811.live