Page
4
/
84
Safety Recommendations
REMEMBER SAFETY FIRST
Using equipment safely
Your Cable Modem has been manufactured to meet safety standards, but you must take care if you want it
to perform properly and safely.
It is important that you read this booklet completely, especially the safety instructions below. If you have
any doubts about the installation, operation or safety of decoder, please contact your supplier.
To avoid the risk of electric shock
Disconnect the Cable Modem from the mains supply before you connect the Cable Modem to (or
disconnect it from) any other equipment. Remember that contact with 110 ~ 240 Volt AC mains can
be lethal or cause severe electric shock.
Never remove the Cable Modem’s cover. Should the Cable Modem fail, contact the Customer Service
to arrange repair or service.
Never allow anyone to push anything into holes, slots or any other opening in the case
Do not block the Cable Modem’s ven
tilation slots; never stand it on soft furnishings or carpets
Do not put anything on the Cable Modem which might spill or drip into it (eg. Lighted candles or
containers of liquids). Do not expose the Cable Modem to dripping or splashing. If an object or liquid
enters inside the Cable Modem, unplug it immediately and contact the Customer Service.
Do not store the Cable Modem in excessively hot, cold or damp conditions. The Cable Modem is
intended to operate at an ambient temperature of less than 40 degrees Celsius and a maximum
humidity level of 75%. In case of a storm, it is recommended that you unplug the Cable Modem from
the mains and from the R/F Network.
Leave the mains socket accessible so that you can unplug the set quickly
Connecting to the mains supply
This Cable Modem is designed to operate at 110 ~ 240 VAC.
If you are in any doubt about the mains lead, the plug or connection, please consult the Customer
Service.
Only the power adapter supplied with the decoder has to be used
Ensuring optimum performance
Leave 7cm to 10cm around the Cable Modem to ensure that proper ventilation gets to the Cable
Modem.
Do not store your Cable Modem on its side (if not allowed)
To clean the Cable Modem, use a dry, clean soft cloth with no cleaning solvent or abrasive products.
Clean the ventilation openings regularly.