Page 31 / 84
Scroll up to view Page 26 - 30
Page
31
/
84
2.
Local Area Network
This page allows you to configure Local Area Network, DHCP server, DNS server and Domain Name.
Fig. 2-13 Basic\Local Area Network
Page 32 / 84
Page
32
/
84
3.
DHCP Client Devices
This page reports current DHCP client information containing Mac Address, IP Address and Time
expiration of each client if the DHCP server was enabled in Local Area Network page.
Fig. 2-14 Basic\DHCP Client Devices
Page 33 / 84
Page
33
/
84
Advanced
–
Advanced Web Page Group
1.
Options
This page allows you to configure router options. You can activate settings by checking them and clicking
“
Save
”
button.
Fig.2-15 Advanced\Options
WAN Blocking
prevents others on the WAN side from being able to ping your gateway. With WAN
Blocking enabled, your gateway will not respond to pings it receives, effectively “hiding” your
gateway.
IPSec Pass Through
enables IPSec type packets to pass WAN
LAN. IPSec (IP Security) is a
security mechanism used in Virtual Private Networks (VPNs).
PPTP Pass Through
enables PPTP type packets to pass WAN
LAN. PPTP (Point to Point
Tunneling Protocol) is another mechanism sometimes used in VPNs.
Multicast
enables multicast traffic to pass WAN
LAN. You may need to enable this to see some
types of broadcast streaming and content on the Internet.
UPnP
Universal Plug and Play (UPnP) helps devices, such as Internet appliances and computers,
access the network and connect to other devices as needed. UPnP devices can automatically discover
the services from other registered UPnP devices on the network.
Page 34 / 84
Page
34
/
84
2.
IP Filters
This page enables you to enter the IP address ranges of PCs on your LAN that you don’t want to have
outbound access to the WAN. These PCs can still communicate with each other on your LAN, but
packets they send to WAN addresses are blocked by the gateway.
Fig. 2-16 Advanced\IP Filters
You can add a blank row to the list by clicking
“
Add row
”
button. Entering the IP address range of PCs
on your LAN and then clicking
“
Save
”
button for saving the configuration.
Check the
“
Delete
”
option of a row and then clicking
“
Save
”
button for deleting the row.
Page 35 / 84
Page
35
/
84
3.
MAC Filters
This page enables you to enter the MAC address of specific PCs on your LAN that you do not wish to
have outbound access to the WAN. As with IP filtering, these PCs can still communicate with each other
through the gateway, but packets they send to WAN addresses are blocked.
Fig. 2-17 Advanced\MAC Filters
You can add a blank row to the list by clicking
“
Add row
”
button. Entering the MAC address of PC on
your LAN and then clicking
“
Save
”
button for saving the configuration.
Check the
“
Delete
”
option of a row and then clicking
“
Save
”
button for deleting the row.
19216811.live