12

1 GETTING STARTED

DMS-CTC-20120510-0000 v1.0

USB LED

Wireless LED

Broadband LED

Internet LED

Colour

State

Description

Green

Solid on

Device(s) connected to the MediaAccess Gateway’s USB port

Off

No device connected to the MediaAccess Gateway’s USB port

Colour

State

Description

Green

Solid on

No wireless activity, WPA2-PSK or WPA-PSK encryption

Blinking

Wireless activity, WPA2-PSK or WPA-PSK encryption

Orange

Solid on

No wireless activity, WEP encryption

Blinking

Wireless activity, WEP encryption

Red

Solid on

No wireless activity, no security

Blinking

Wireless activity, no security

Red/green

Toggling

Wireless client registration phase

Off

Wireless access point disabled

Colour

State

Description

Green

Solid on

DSL line synchronised

Blinking

Trying to detect carrier signal or pending DSL line synchronisation

Off

MediaAccess Gateway powered off.

Colour

State

Description

Green

Solid on

Connected to the Internet, no activity

Blinking

Connected to the Internet, sending/receiving data

Red

Solid on

Failed to setup the Internet connection

Off

No Internet connection

13

1 GETTING STARTED

DMS-CTC-20120510-0000 v1.0

TV LED

Phone LED

Upgrade LED

WPS LED

For more information about WPS, see

“5.1 Connecting Your Wireless Client via WPS” on page 40

.

Colour

State

Description

Green

Solid on

Set-Top Box (STB) connected to the MediaAccess Gateway

Blinking

Unknown STB connected to the MediaAccess Gateway

Off

No STB connected to the MediaAccess Gateway

Colour

State

Description

Green

Solid on

Registered at your VoIP provider, no activity.

Blinking

Registered at your VoIP provider, activity.

Off

Not registered to your VoIP provider.

Colour

State

Description

Blue

Solid on

Software upgrade ongoing

Off

No software upgrade ongoing

Do not power off your MediaAccess Gateway or disconnect any cables as long as the

Upgrade

LED is on.

Interrupting the upgrade procedure may damage your MediaAccess Gateway.

Colour

State

Description

Green

Solid On

Client successfully registered via WPS

Orange

Blinking

WPS registration ongoing

Red

Blinking

Error occurred

14

1 GETTING STARTED

DMS-CTC-20120510-0000 v1.0

1.3

Preparing for the Installation

DSL service requirements

Make sure that:



Your service provider activated the DSL service on your telephone line by your service provider.



You have the installation information (for example, user name, password, service profile,...) provided by your service

provider at hand.

Local connection requirements

Wireless connection

If you want to connect your computer using a wireless connection, your computer must be equipped with a WiFi-certified

wireless client adapter.

Wired connection

If you want to connect a computer using a wired connection, your computer must be equipped with an Ethernet Network

Interface Card (NIC).

Start with the installation

You are now ready to start with the installation of your MediaAccess Gateway.

15

2 GUIDED INSTALLATION

DMS-CTC-20120510-0000 v1.0

2

Guided Installation

Introduction

In the guided installation, the Setup wizard on the Setup CD will assist you with the installation of your MediaAccess

Gateway.

If you do not want to use the Setup CD or if the Setup CD is not included in your package, follow the installation procedure

described in

“3 Manual Installation” on page 19

.

Requirements

To use the guided installation you must comply with the following requirements:



Your computer must run one of the following operating systems:



Microsoft Windows 7 and higher



Microsoft Windows 7 x64 and higher



Microsoft Windows Vista and higher



Microsoft Windows XP Service Pack 2 (SP2) and higher



Mac OS X 10.6 (Snow Leopard)



Mac OS X 10.5 (Leopard)



Mac OS X 10.4 (Tiger)



You must have administrative rights on your computer.

If you do not comply with these requirements, use the

“3 Manual Installation” on page 19

.

Running the Setup wizard

To start the Setup wizard:

1

Insert the Setup CD into your computer's CD- or DVD drive.

2

If your computer runs:



Microsoft Windows: The Setup CD starts automatically.

If the Setup CD does not autostart, see

“The Setup CD does not start automatically” on page 104

.



Mac OS X: Double-click

Menu

in the window with the content of the Setup CD.

3

Select the language of your choice and click

OK

.

4

The Setup wizard will now guide you through the installation of your MediaAccess Gateway.

16

2 GUIDED INSTALLATION

DMS-CTC-20120510-0000 v1.0

5

At the end of the installation, the following screen appears:

Select

Go to the Technicolor Gateway web interface

if you want to go to the

MediaAccess Gateway GUI

after closing

the wizard. On the

MediaAccess Gateway GUI

, you can configure all services of your MediaAccess Gateway.

6

Click

Finish

.

7

The

CD menu

appears.

CD Menu

On the

CD Menu

, you can click:



Initial Setup

to connect your computer to the MediaAccess Gateway and configure your local network.



Reconfigure my Technicolor Gateway

to fully reconfigure your MediaAccess Gateway.



Setup my computer

to connect your computer to the MediaAccess Gateway network.



Documentation

to view a list of the documentation that is available for your MediaAccess Gateway.



Visit technicolor.com

to visit the online support sections.

If you reconfigure your MediaAccess Gateway via the

CD menu

, the MediaAccess Gateway will be reconfigured

from scratch. All your current settings will be lost. If you only want to make small changes to your configuration

(for example, changing the security), we recommended you to do this via the

MediaAccess Gateway GUI

. For

more information, see

“4.1 MediaAccess Gateway GUI” on page 32

.

Actual available items depend on the Setup CD delivered with your MediaAccess Gateway.