Page 6 / 159 Scroll up to view Page 1 - 5
1
ABOUT THIS SETUP AND USER GUIDE
DMS-CTC-20120510-0000 v1.0
About this Setup and User Guide
In this Setup and User Guide
The goal of this Setup and User Guide is to show you:
Set up your MediaAccess Gateway and local network
Configure and use the main features of your MediaAccess Gateway.
For more advanced scenarios and features visit the documentation pages on www.technicolor.com
.
Used Symbols
Terminology
Generally, the MediaAccess TG788vn v2 will be referred to as MediaAccess Gateway in this Setup and User Guide.
Typographical Conventions
Following typographical convention is used throughout this manual:
This sa
mple text
indicates a hyperlink to a Web site.
Example: For more information, visit us at www.technicolor.com
.
This sample text
indicates an internal link.
Example: If you want to know more about guide, see
“About this Setup and User Guide” on page 1
.
This sample text
indicates an important content-related word.
Example: To enter the network, you
must
authenticate yourself.
This sample text
indicates a GUI element (commands on menus and buttons, dialog box elements, file names, paths and
folders).
Example: On the
File
menu, click
Open
to open a file.
The
danger
symbol indicates that there may be a possibility of physical injury.
The
warning
symbol indicates that there may be a possibility of equipment damage.
The
caution
symbol indicates that there may be a possibility of service interruption.
The
note
symbol indicates that the text provides additional information about a topic.
Page 7 / 159
3
1 GETTING STARTED
DMS-CTC-20120510-0000 v1.0
1
Getting Started
Introduction
This chapter gives you a brief overview of the main features and components of the MediaAccess Gateway. After this
chapter we will start with the installation.
Do not connect any cables to the MediaAccess Gateway until instructed to do so.
Page 8 / 159
4
1 GETTING STARTED
DMS-CTC-20120510-0000 v1.0
1.1
Features at a Glance
Introduction
This section provides a brief overview of the main features of your MediaAccess Gateway.
IPv6 Ready
Your MediaAccess Gateway is IPv6 ready. Internet Protocol version 6 (IPv6) is the next generation of Internet technologies
aiming to effectively support the ever-expanding Internet usage and functionality, and also to address security concerns that
exist in an IPv4 environment.
Internet connection features
Broadband Internet access
via the integrated DSL
modem.
The first chapters describe how to connect your MediaAccess Gateway to the Internet.
3G (Fall-back) High-speed Internet Access
via the optional mobile USB adaptor.
For more information, see
“3.5 Setting Up the 3G Fall-Back WAN Connection” on page 27
.
Internet Security
for your entire network.
For more information, see
“10 Internet Security” on page 91
.
Useful network tools
like
UPnP
,
Dynamic DNS
and many more.
For more information, see
“9 Network Services” on page 77
.
Local networking features
Wired access
for your local network devices via the Ethernet interface.
For more information, see
“3.3 Connecting Your Network Devices to the MediaAccess Gateway” on page 23
.
Wireless access
for your local network devices via the integrated IEEE 802.11n wireless access point.
For more information, see
“5 The MediaAccess Gateway Wireless Access Point” on page 39
.
An
Integrated Media Server
allowing you to share your media with media players and other network devices. For more
information, see
“8 Sharing Content” on page 63
.
Telephony features
The MediaAccess Gateway offers
Voice over IP
(VoIP) connectivity for traditional phones and IP phones.
For more information see
“6 Telephony” on page 47
ECO label
Technicolor’s ECO label guarantees you that the MediaAccess Gateway is able to reduce its power consumption to an
absolute minimum. For more information, see
“7 Saving Energy” on page 59
.
MediaAccess Gateway configuration tools
The
MediaAccess Gateway
Setup CD allows you to configure your MediaAccess Gateway and helps you to connect
your computers to the MediaAccess Gateway.
The
MediaAccess Gateway GUI
allows you to configure your MediaAccess Gateway via your web browser.
For more information, see
“4.1 MediaAccess Gateway GUI” on page 32
.
Page 9 / 159
5
1 GETTING STARTED
DMS-CTC-20120510-0000 v1.0
1.2
Components
Overview
This section provides an overview of the different components of the MediaAccess Gateway:
Topic
Page
1.2.1 Power
6
1.2.2
Local Network Connection
7
1.2.3
Broadband Connection
8
1.2.4
Voice Connection
9
1.2.5 Buttons
10
1.2.6
Status LEDs
11
Page 10 / 159
6
1 GETTING STARTED
DMS-CTC-20120510-0000 v1.0
1.2.1
Power
Overview
Power inlet
The power inlet
(
)
allows you to connect the power supply.
Power switch
The power switch
(
)
allows you to power on/off your MediaAccess Gateway.
Only use the power supply delivered with your MediaAccess Gateway.

Rate

3.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top