1. Home
    2. /
  2. Manuals
    3. /
  3. SOHO
    4. /
  4. 18-OB-WR85-FHEU
    5. /
  5. 8
Page 36 / 69 Scroll up to view Page 31 - 35
35
Welcome to Telnet Daemon v1.01
cmd>lanShow
---==== LAN configuration ====---
IP Address: 192.168.1.1
Subnet Mask: 255.255.255.0
MAC address 00:02:6f:00:08:41
DHCP Server: Enabled
IP Pool Starting Address:
192.168.1.2
IP Pool Ending Address:
192.168.1.254
Lease Time:
One day
Local Domain Name:
---==== DHCP configuration ====---
Item
IP
MAC Address
Host name
14.“wanShow” displays the WAN configuration, including IP address, subnet mask, MAC address,
gateway, and WAN mode.
cmd>wanShow
---==== WAN configuration ====---
WAN mode: DHCP client
IP Address: 192.168.123.156
Subnet Mask: 255.255.255.0
Gateway: 192.168.123.254
MAC address: 00:d0:59:13:3e:91
15. “snmpShow” shows SNMP configuration. It displays the information of SNMP Community
and SNMP Trap. Type “snmpShow” at the command line prompt.
cmd>snmpShow
---==== SNMP Information ====---
SNMP Status: Enable
---==== SNMP Community info ====---
--------------------------------------------------------------------------
Item
Access Right
Community
Validity
1
WRITE
public
Enable
2
CREATE
private
Enable
3
DENY
Enable
5
DENY
Enable
Page 37 / 69
36
16. “fwShow” shows firewall configuration. It displays the information of Blocking WAN ping,
MAC control, and client filtering.
Version of
SNMP
IP address for SNMP
Trap report
---====
SNMP Trap info
====---
Item
Version
IP
Community
------------------------------------------------------
1
version 1
192.168.1.2
public
2
disable
3
disable
4
disable
5
disable
Welcome to Telnet Daemon v1.01
cmd>fwShow
----===== Block WAN Ping setting ====----
Block WAN Ping: Enable
----===== MAC Control setting ====----
MAC Address Control: Enabled
Unspecified MAC address connect to Internet: Allow
---- Mac control list ----
item
Allow
MAC Address
Validity
1
Allow
0000e27a593f
Enable
2
Allow
026f01c03d44
Enable
3
Allow
00043f253f55
Disable
4
Disallow
000000000000
Disable
5
Disallow
000000000000
Disable
6
Disallow
000000000000
Disable
7
Disallow
000000000000
Disable
8
Disallow
000000000000
Disable
Page 38 / 69
37
---==== IP Filter Configuration ====---
---------------------------------------
IP
Port
Type
Block
Day
Time
192.168.1.2-
2
21-
21 TCP
Always
N/A- N/A
N/A- N/A
Disable
192.168.1.3-
3
21-
21 TCP
Time
MON-TUE
1:00am- 4:00am Enable
192.168.1.0-
0
0-
0 TCP
Always
N/A- N/A
N/A- N/A
Disable
192.168.1.0-
0
0-
0 TCP
Always
N/A- N/A
N/A- N/A
Disable
192.168.1.0-
0
0-
0 TCP
Always
N/A- N/A
N/A- N/A
Disable
192.168.1.0-
0
0-
0 TCP
Always
N/A- N/A
N/A- N/A
Disabl
17. “pppoeShow” displays PPPoE configuration.
6.3
Configuring Wireless LAN through Telnet
The command “wlanSet” can configure the Wireless LAN part. Type “wlanSet” and the action
you want to perform. You need to know actions for the Wireless LAN setting.
Usage: wlanSet [ACTION] [arg1] [arg2] ….
ACTION
Description
Usage
ssid
Change the SSID
wlanSet ssid [SSID]
channel
Change the wireless
channel[1-14]
wlanSet channel [channel
number]
Welcome to Telnet Daemon v1.01
cmd>pppoeShow
---==== PPPoE configuration ====---
PPPoE Status: Disconnected
User Name: s004282
User password: winnie6511
Service Name:
MTU (1400-1492): 1492
Maximum Idle Time: 0
Auto-reconnect: Selected
cmd>
Page 39 / 69
38
ACTION
Description
Usage
frag
Change the fragment
Threshold
wlanSet frag [fragment
threshold]
rts
Change the RTS Threshold
wlanSet rts [RTSThreshold]
keyid
Change the WEP default
key id [1-4]
wlanSet keyid [
solate key
id]
beacon
Change the beacon Period
[0-4095ms]
wlanSet beacon [beacon
period]
maxass
Change the max associated
stations [1-300]
wlanSet maxass [number of
stations]
wepkey
Change the WEP key
wlanSet wepkey [keyid]
[key(hex format)]
wep
wlanSet wep [0|64|128]
wlanSet wep [0|64|128]
isolate
Change the Wireless Client
Isolation: 0:disable,
1:enable
wlanSet
solate [0|1]
hidessid
Change the Hide SSID:
0:disable, 1:enable
wlanSet hidessid [0|1]
block
Change the Block Responds
to ‘Unspecified-SSID’:
0:disable, 1:enable
wlanSet block [0|1]
power
Change the Outpower level:
0:Original, 1: 100mW, 2:
50mW, 3: 20mW
wlanSet power [0|1|2|3]
aplink
Change the AP Link
Completeness: 0:disable,
1:enable
wlanSet aplink [0|1]
authalgo
Change Authentication
algorithm: 1:Open system,
2: Shared key, 3:Auto
wlanSet authalgo [1|2|3]
mac
Change the MAC address
filtering.
WlanSet mac
[disable|include|exclude|select|
unselect|setmac|clear|clearall]
macShow
Show the MAC filtering
setting.
WlanSet macshow
1.
The “ssid” action can change the SSID
Usage: wlanSet ssid [New SSID]
New SSID
Page 40 / 69
39
2.
The “channel” action can change the wireless channel.
Usage: wlanSet channel [New channel number]
3.
The “frag” action can change the frame’s fragment threshold.
Fragment Threshold: 256~2346 bytes , default is 2346
Usage: wlanSet frag [ New fragment threshold]
4.
The “rts” action can change the frame’s RTS threshold.
RTS Threshold: 0~3000 ms, default is 2432
Usage: wlanSet rts [Nes RTS threshold]
5.
The “keyid” action can change the WEP default ID( the default is from 1 to 4).
Usage: wlanSet keyid [New key default ID]
6.
cmd>wlanSet ssid WirelessLAN
Old SSID: Wireless
New SSID (after reset): WirelessLAN
(Please remember to reset the Access Point if you made any change).
cmd>wlanSet channel 5
Old Channel: 6
New Channel (after reset): 5
(Please remember to reset the Access Point if you made any change).
cmd>wlanSet frag 2000
Old Fragment Threshold: 2346
New Fragment Threshold (after reset): 2000
(Please remember to reset the Access Point if you made any change).
cmd>wlanSet rts 2500
Old RTS Threshold: 2432
New RTS Threshold (after reset): 2500
(Please remember to reset the Access Point if you made any change).
cmd>wlanSet keyid 2
Old WEP default key id: 0
New WEP default key id (after reset): 2
(Please remember to reset the Access Point if you made any change).

Rate

4 / 5 based on 2 votes.

Popular SOHO Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top