Page 16 / 69
Scroll up to view Page 11 - 15
15
5.2.3 Static IP
If your Service Provider has assigned a fixed IP address, enter the assigned IP Address, Subnet
Mask and ISP Gateway Address provided.
5.2.4 DNS Settings
Domain Name Servers are used to map an IP address to the equivalent domain name. Your ISP
should provide the IP address for one or more domain name servers.
The access point can be a DNS
relay to send clients’ request to the Domain Name Server. You can do a DNS lookup to find the IP
address of some specific servers. Click
APPLY
to complete your change.
5.3
LAN Setting
Page 17 / 69
16
The access point must have an IP address for the local network. You can enable DHCP service
for dynamic IP address allocation to your clients, or configure filtering functions based on specific
clients or protocols.
5.3.1 LAN Settings
You can change the basic settings of AP here, including IP address, Subnet mask, IP Pool
Address, Lease Time, and Local Domain Name. Click
APPLY
to complete your change.
(1)
IP Address:
The IP address of the AP. You should have a unique IP address to your
network.
(2)
Subnet Mask:
The Subnet Mask of your access point. The default value is 255.255.255.0.
(3)
DHCP Server:
By default, the AP can function as a DHCP server. The AP can automatically
Page 18 / 69
17
assign an IP address to a client. To enable this function, clear the “Enable” check box.
(4)
IP Pool Starting Address & IP Pool Ending Address:
The first and the last address in the IP
address pool.
(5
) Lease Time:
The period client can have the IP address assigned by DHCP server.
(6)
Local Domain Name:
It’s optional.
5.3.2 DHCP Client Lists
This page lists clients that are connected to the access point via IP address, host name, and
MAC address. You can click
Refresh
button to obtain most up-to-date information.
5.4
NAT Setting
Network Address Translation (NAT) allows multiple users at your local site to access the
Internet through a single public IP address or multiple public IP addresses. NAT can also prevent
hacker attacks by mapping local addresses to public addresses for key services such as the Web or
FTP.
5.4.1 Special Application
Applications such as Internet gaming, video conferencing, and Internet telephony require multiple
Page 19 / 69
18
connections. The Special Application feature allows these applications to work properly.
(1)
Trigger Port:
The port will be used to trigger the application. This allows the Router to watch
out-going data for specific port numbers.
(2)
Trigger Type:
The protocol will be used to trigger the special application.
(3)
Public Port:
This is the port number on the WAN side that will be used to access the
application.
(4)
Public Type:
The protocol for special application.
(5)
Enabled:
Check “Enable” to enable special application of corresponding items.
5.4.2 Virtual Server
Page 20 / 69
19
You can configure the access point as a virtual server so that remote users accessing services
such as the Web or FTP at your local site via public IP addresses can be automatically redirected to
local servers configured with private IP addresses. In other words, depending on the requested
service (TCP/UDP port number), the access point redirects the external service request to the
appropriate server (located at another internal IP address).
(1)
Mapping Ports:
The port number of the service used by the server computer. You can use a
comma to add multiple ports or use a dash to give port ranges.
(2)
Server IP:
The IP address of server computer that provides the services.
(3)
Enable:
Check “Enable” to enable corresponding items.
19216811.live