Virtual Server

Use the Virtual Server function when you want different servers/clients in your LAN to

handle different service/Internet application type (e.g. Email, FTP, Web server etc.) from

the Internet. Computers use numbers called port numbers to recognize a particular

service/Internet application type. The Virtual Server allows you to re-direct a particular

service port number (from the Internet/WAN Port) to a particular LAN private IP address

and its service port number.

Server Name

: Assign a name to the virtual server.

Server IP

: This is the LAN client/host IP address that the Public Port number packet will

be sent to.

External/Internal Port Start

: Here the starting port number must be entered.

External/Internal Port End

: Here the end port number must be entered

Note : The ports from the start port till the End port will be opened

Click ‘Apply’ for the changes to take effect.

TOOLBOX

Sitecom Cloud Security

Antivirus software alone is not safe enough. You can now benefit from additional built-in

security in your modem or router. Protect all devices in your home network against

cybercrime while browsing. Activate in just one click, your network and devices are

better secured than ever before.

Your Sitecom device comes with a 6 month free Sitecom cloud security subscription.

Activating Sitecom Cloud Security

After you have set up your Sitecom device for internet access, open the web browser and

enter

http://www.sitecomcloudsecurity.com

in the address bar.

If the device has been properly configured the following web page should be shown.

Here you can see which security features are activated.

The Sitecom Cloud Security service offers the following protection options:



Anti-Malware



Anti-Phishing



Protection against unsafe websites



Advertisement blocking

With the protection of unsafe websites activated the Sitecom Cloud Security will always

check if a website is safe. If it is not safe it will inform you that is not safe to enter.

If you still wish to visit t

his webpage click on ‘proceed anyway’. Alternatively click ‘Back

to Safety’ so that your

security will not be breached.

Configuring Sitecom Cloud Security

If you wish to change your security options or to extend your subscription at any time,

open

http://www.sitecomcloudsecurity.com

from your web browser.

You will be asked for a username and password. These can be found on the backlabel on

the bottom of your Sitecom router or modem.

If the login

succeeded you can click on ‘Settings’ to change your security options.

Or click ‘License’ to renew your subscription.

Disabling Sitecom Cloud Security

If you wish to disable to Sitecom cloud security at any time, open the webpage of your

Sitecom product and log in with the supplied credentials (these can be found on the back

label on the bottom of your Sitecom device).

Go to Toolbox and select “Sitecom Cloud Security”.

Click the “Disable” radio button and click ‘

Apply’

for the settings to take effect.

Password

You can change the password required to log into the router's system web-based

management. Passwords can contain 0 to 12 alphanumeric characters, and are case

sensitive.

Old Password

: Fill in the current password to allow changing to a new password.

New Password

: Enter your new password.

Confirmed Password

: Enter your new password again for verification purposes.

Click

Apply

at the bottom of the screen to save the above configuration.

Time Settings

The Time Zone allows your router to set its time; especially for recording System Log.