The software is now ready to be installed, Click

Install

to continue.

Once the installation is finished the software will inform you. If

“

Launch Sitecom USB

Device Server

”

checked the software will automatically be launched after you clicked

Finish

.

MacOS

Insert the CD-ROM that was included with your router and select

“

Install

”

from the cd-

menu.

Click

Install

to continue installation.

Enter your Mac username and password and click

OK

to continue.

Once the installation is finished the software will inform you and requires to restart the

system.

Connect & Disconnect

“NetUSB” allows you to use USB printers when they’re actually connected to the Sitecom

USB server.

The “connect” operation is a software operation that simulates an actual USB device

plug-

in. Therefore, when you do a “connect” operation in the Control Center, the PC can

detect a USB device’s plug

-in, although actually you do not plug in any USB device to

your PC. Similarly, the “disconnect” operation is a software operation that simulates the

disconnection of the USB device.

Note

:

If a USB device is “connected” by a PC, we say that PC has the ownership of the

USB device. Only one PC can get the ownership of a USB device at the same time.

NetUSB installation

The steps to do installation for USB devices, like MFPs:



Make sure the router is turned on.



Connect the USB device to the USB port of the router.



Run the Control Center. In the “USB MFP Server List”

window, you can see

the host names and IP addresses all of the Sitecom servers (in blue) on the

network, as shown below.



Click the server. Then all USB devices attached to the server will be shown.



Please follow the user manual of the USB device to install its driver. For

example, you may put the driver CD of the USB device in the CD-ROM player

to install the driver.



When you are asked to plug in the USB device into PC’s USB port, click the

desired USB device in the Control Center and then click the

“Auto

-Connect

Printer” button to do the connect operation and get the ownership of the USB

device. The computer name of the device owner will be shown at the end of

the device.



PC will automatically detect that the USB device is plugged-in. On the right

side of the Windows Task Bar, you can see the information of the new device.

Continue to follow the user manual of the USB device to do the rest jobs of

installation, until the driver installation has finished.

After the installation, you can see the newly created devices on the PC. If the USB device

is a MFP, you can see a new printer and a new scanner from the “Control Panel”.