TR-69

As a bidirectional SOAP/HTTP-based protocol, it provides the communication between

customer-premises equipment (CPE) and Auto Configuration Servers (ACS). It includes

both a safe auto configuration and the control of other CPE management functions within

an integrated framework. In the course of the boom of the broadband market, the

number of different Internet access possibilities grew as well (e.g. modems, routers,

gateways, set-top box, VoIP-phones). At the same time the configuration of this

equipment became more complicated -- too complicated for the end-users. For this

reason the TR-069 standard was developed. It provides the possibility of auto

configuration of these access types. The technical specifications are managed and

published by the Broadband Forum. Using TR-069, the terminals can get in contact with

the Auto Configuration Servers (ACS) and establish the configuration automatically.

Accordingly other service functions can be provided. TR-069 is the current standard for

activation of terminals in the range of DSL broadband market.

Firewall

The Broadband router provides extensive firewall protection by restricting connection

parameters, thus limiting the risk of hacker attacks, and defending against a wide array

of common Internet attacks. However, for applications that require unrestricted access to

the Internet, you can configure a specific client/server as a Demilitarized Zone (DMZ).

ACL

This page is used to IP addresses for Access Control. If ACL is enabled only the IP

Addresses that are in the ACL Table can access the CPE.

IP Filter

Click “Add a rule” to add a filtering rule.

Enable

: Select to enable IP filter rule.

Source IP

: The source IP address or range of packets to be monitored.

Subnet Mask

: It is the destination IP addresses based on above destination subnet IP

Source Port

: This Port or Port Ranges defines the port allowed to be used by the

Remote/WAN to connect to the application. Default is set from range 0 ~ 65535. It is

recommended that this option be configured by an advanced user.

Destination IP

: This is the destination subnet IP address.

Subnet Mask

: It is the destination IP addresses based on above destination subnet IP

Destination Port

: This is the Port or Port Ranges that defines the application.

When you finish, click ‘Submit’ to save the settings made.

IP Filter Listing

#

: Item number.

Enable

: Whether the connection is currently active.

Src IP Mask

: The source IP address or range of packets to be monitored.

Dest IP Mask

: This is the destination subnet IP address.

Protocol

: It is the packet protocol type used by the application, select either TCP or UDP

or ICMP

Src port

: This Port or Port Ranges defines the port allowed to be used by the

Remote/WAN to connect to the application. Default is set from range 0 ~ 65535. It is

recommended that this option be configured by an advanced user.

Dest Port

: This is the Port or Port Ranges that defines the application.

URL Filter

Here it’s poss

ible to block certain websites.

Enter the website you wish to block and make sure the rule is active.

Click ‘Save’ to app

ly the new rule.

DMZ

The DMZ Host is a local computer exposed to the Internet. When setting a particular

internal IP Address as the DMZ Host, all incoming packets will be checked by the firewall

and NAT algorithms then passed to the DMZ Host.

Enable DMZ and enter the IP address for which you want unrestricted access to the

internet in the DMZ Host IP address. Click Apply to save and apply the settings.