Page 66 / 100
Scroll up to view Page 61 - 65
Kernel log
Here you can view the messages the kernel puts out.
Processes
Here you can see the running processes. There are 3 buttons to alter the functionality of the
process.
Hang up: This signal is used to report the termination of the controlling process on a
terminal to jobs associated with that session; this termination effectively disconnects all
processes in the session.
Terminate:
A
generic signal used to cause program termination. It is the normal way to
politely ask a program to terminate.
Page 67 / 100
Kill: Used to cause immediate program termination. It cannot be handled or ignored,
and is therefore always fatal. It is also not possible to block this signal.
Realtime Load
On this page you can view the actual load on the entire network. The page shows 3 graphs in 3
different colors.
Page 68 / 100
Initscripts
On this page you can see the scripts controlling the various functions of the router. There are 4
buttons available.
Enable/Disable: You can choose whether you want the service to be automatically
started during bootup.
Start: Start the service.
Restart: Restart the service.
Stop: Stop the service.
Page 69 / 100
Scheduled Tasks
This window allows you to edit the crontab file. This contains the schedule of cron entries to be
run at specified times. The commands that can be used are standard Unix commands.
Page 70 / 100
Administration
Administration
–
Time Zone
The Time Zone allows your router to base its time on the settings configured here, which will
affect functions such as Log entries and Firewall settings. You can choose to set the time
manually or via a NTP server.
NTP server: You can set an NTP server address.
Set Time Zone: Select the time zone of the country you are currently in. The router will
set its time based on your selection.
Enable Daylight Saving: The router can also take Daylight savings into account. If you
wish to use this function, you must check/tick the enable boxto enable your daylight
saving configuration (below).
Start Daylight Savings Time: Select the period in which you wish to start daylight
Savings Time.
End Daylight Savings Time: Select the period in which you wish to end daylight Savings
Time.
Click Save & Apply at the bottom of the screen to save the above configuration.
19216811.live