Administration

–

Administration

You can change the password required to log into the router's system web-based management.

Passwords can contain 0 to 12 alphanumeric characters, and are case sensitive.



Administrator Username

: By default this is ‘admin’.



Current Password: Fill in the current password to allow changing to a new password.



New Password: Enter your new password.



Verify Password: Enter your new password again for verification purposes.

Click Save & Apply at the bottom of the screen to save the above configuration.

Administration

–

Backup/Flash Firmware

Use the "Generate archive" button to save the current configuration to a file on your PC. You

can then use the "Restore backup" button to restore the saved configuration to the router.

Alternatively, you can use the "Reset to Factory Defaults

” button

to force the router to perform a

power reset and restore the original factory settings.

This page also

allows you to upgrade the Broadband router’s system firmware. To upgrade the

firmware of your Broadband router, you need to download the firmware file to your local hard

disk, and enter that file name and path in the appropriate field on this page. You can also use

the Browse button to find the firmware file on your PC.

Once you’ve selected the new firmware file, click

Save & Apply at the bottom of the screen to

start the upgrade process.

Administration

–

SSH

SSH is a cryptographic (encrypted) network protocol to allow remote login and other network

services to operate securely over an unsecured network.



Interface: Select the interface on which you want the SSH service to be active.



Port: Select the port on which you want the SSH service to be active. Default is 22.



SSH keys: Here you can paste public SSH-Keys (one per line) for SSH Public-key

authentication.

Administration

–

LED Configuration

On this page you can switch the LEDs on the router on or off.



Power: This switches of the lighting behind the Greyhound logo.



LAN: This switches of all 4 LAN LEDs.



WLAN-2.4GHz: This switches off the 2.4GHz WLAN LED.



WLAN-5GHz: This switches off the 5GHz WLAN LED.

Toolbox Settings

Toolbox

–

DDNS

DDNS allows you to map the static domain name to a dynamic IP address. You must get an

account, password and your static domain name from the DDNS service providers. This router

supports DynDNS, no-ip and other common DDNS service providers.



Enable/Disable: Enable or disable the DDNS function of this router.



Service: Select a DDNS service provider.



Hostname: Fill in your static domain name that uses DDNS.



Username: The account that your DDNS service provider assigned to you.



Password: The password you set for the DDNS service account above.

Click Save & Apply at the bottom of the screen to save the above configuration.