Page 81 / 100
Scroll up to view Page 76 - 80
Once the installation is finished the software will inform you. If “
Launch Sitecom USB Device
Server
” checked the software will automatically be launched after you clicked
Finish.
Page 82 / 100
MacOS
Insert the CD-
ROM that was included with your router and select “
Install
” from the cd
-menu.
Click Install to continue installation.
Enter your Mac username and password and click OK to continue.
Once the installation is finished the software will inform you and requires to restart the system.
Page 83 / 100
Connect & Disconnect
“NetUSB” allows you to use USB printers when they’re actually connected to the Sitecom USB
server.
The
“connect” operation is a software operation that simulates an actual USB device plug
-in.
Therefore, when you do a “connect” operation in the Control Center, the PC can detect a USB
device’s plug
-in, although actually you do not plug in any USB device to your PC. Similarly, the
“disconnect” operation is a software operation that simulates the disconnection of the USB
device.
Note
: If a USB device is “connected” by a PC, we say that PC has the ownership of the USB
device. Only one PC can get the ownership of a USB device at the same time.
Page 84 / 100
NetUSB installation
The steps to do installation for USB devices, like MFPs:
Make sure the router is turned on.
Connect the USB device to the USB port of the router.
Run the Control Center. In the “USB MFP Server List” win
dow, you can see the host
names and IP addresses all of the Sitecom servers (in blue) on the network, as
shown below.
Click the server. Then all USB devices attached to the server will be shown.
Please follow the user manual of the USB device to install its driver. For example,
you may put the driver CD of the USB device in the CD-ROM player to install the
driver.
When you are asked to plug in the USB device into PC’s USB port, click the desired
USB device in the Control Center and then click the
“Auto
-
Connect Printer” button
to do the connect operation and get the ownership of the USB device. The
computer name of the device owner will be shown at the end of the device.
Page 85 / 100
PC will automatically detect that the USB device is plugged-in. On the right side of
the Windows Task Bar, you can see the information of the new device. Continue to
follow the user manual of the USB device to do the rest jobs of installation, until the
driver installation has finished.
After the installation, you can see the newly created devices on the PC. If the USB device is a
MFP, you can see a new printer and a new scanner from the “Control Panel”.
19216811.live