Toolbox

–

UPnP

With UPnP, all PCs in your network will discover

this router automatically, so you don’t have to

configure your PC and it can easily access the Internet through this router.

UPnP Feature: You can enable or Disable the UPnP feature here. After you enable the UPnP

feature, all client systems that support UPnP, like Windows, can discover this router

automatically and access the Internet through this router without having to configure anything.

The NAT Traversal function provided by UPnP can let applications that support UPnP connect to

the internet without having to configure the virtual server sections.

Click Save & Apply at the bottom of the screen to save the above configuration.

Toolbox

–

Remote Access

The remote management function allows you to designate a host in the Internet the ability to

configure the Broadband router from a remote site. Enter the designated host IP Address in the

Host IP Address field.



Method

: Choose between ‘All Hosts’ or ‘Specific Host’.

If

‘All Hosts’ is chosen

this means

anyone can access the router’s web

-based configuration from a remote location,

providing they know the password.

If ‘Specific Host’ is chosen, you need to enter

the IP

address of the host on the Internet that will have management/configuration access to

the Broadband router from a remote site.



Port: The port number of the remote management web interface.

Click Save & Apply at the bottom of the screen to save the above configuration.

Addendum A: NetUSB

The netUSB functionality of your router requires additional software to work with your

computer. The following section will describe how the software can be installed and used.

Windows

Insert the CD-ROM that was included with your router and select install utility from the cd-

menu.

The software will inform you about what will be installed.

Click Next to continue the installation.

Enter your username and organization if applicable and click Next to continue.

Choose a folder where the software should be installed or keep it to default and click Next to

continue.

The software is now ready to be installed, Click Install to continue.