Interfaces

–

Routes

Static routing is a form of routing that occurs when a router uses a manually-configured routing

entry, rather than information from a dynamic routing traffic. Unlike dynamic routing, static

routes are fixed and do not change if the network is changed or reconfigured.



Destination LAN IP: The IP address of the network to include in the routing table.



Subnet Mask: The subnet mask for this destination. If the destination is a single host,

type 255.255.255.255



Default Gateway: This must be a router on the same LAN segment as the router.



Metric: Represents the number of routers between your network and the destination.



Interface: Select WAN or LAN, depending on which side you want the route to be active.

Click the + sign to add more routes. Click ‘

Save & Apply

’ to save the settings.

StreamBoost

StreamBoost is automatic network bandwidth management / traffic shaping technology. It

intelligently manages network bandwidth and latency, giving each application the bandwidth it

needs for the best possible user experience.

StreamBoost

–

Priorities

You can select the priority of each device on your local network. The priority control buttons are

the arrows within the boxes to the left of each icon representing a device. Click the up arrow to

move the device higher in the priority list, or click the down arrow to lower the priority.

StreamBoost

–

Up Time

Here you can view the Active Time (in minutes) and see what applications are being used. You

can select the time frame from the drop-down menu. Choose from last month, last week, or last

day.

StreamBoost

–

Downloads

Here you can view the type of traffic that is mostly used on your network, including the

consumed bandwidth.

StreamBoost

–

Consumption Per Device

Here you can view the bandwidth consumption per device. You can click on the device to

highlight it. You can select the time frame from the drop-down menu.