Page 106 / 129 Scroll up to view Page 101 - 105
SpeedStream Router User Guide
Parameter
Default Value
Your Value
Reset Time Interval To
Host
Parameter
Default Value
Your Value
IP Address
IP Netmask
Default Router
Host Name
LAN IP
Parameter
Default Value
Your Value
IP Address
Subnet Mask
NAT/NAPT
Parameter
Default Value
Your Value
Interface 1
NAT/NAPT Disabled
NAT Enabled
Internal (LAN) IP Address
NAPT Enabled
Interface 2
NAT/NAPT Disabled
NAT Enabled
Internal (LAN) IP Address
NAPT Enabled
Interface 3
NAT/NAPT Disabled
NAT Enabled
Internal (LAN) IP Address
NAPT Enabled
Interface 4
NAT/NAPT Disabled
NAT Enabled
Internal (LAN) IP Address
NAPT Enabled
Interface 5
NAT/NAPT Disabled
NAT Enabled
Internal (LAN) IP Address
NAPT Enabled
Interface 6
NAT/NAPT Disabled
NAT Enabled
Internal (LAN) IP Address
NAPT Enabled
Interface 7
NAT/NAPT Disabled
NAT Enabled
96
Page 107 / 129
SpeedStream Router User Guide
Parameter
Default Value
Your Value
Internal (LAN) IP Address
NAPT Enabled
Interface 8
NAT/NAPT Disabled
NAT Enabled
Internal (LAN) IP Address
NAPT Enabled
Concurrent NAT/NAPT
Interface 1
Public (WAN) IP Address
Private (LAN) IP Address
Interface 2
Public (WAN) IP Address
Private (LAN) IP Address
Interface 3
Public (WAN) IP Address
Private (LAN) IP Address
Interface 4
Public (WAN) IP Address
Private (LAN) IP Address
Interface 5
Public (WAN) IP Address
Private (LAN) IP Address
Interface 6
Public (WAN) IP Address
Private (LAN) IP Address
Port Forwarding
Parameter
Default Value
Your Value
PPP Login
Parameter
Default Value
Your Value
Connection 1
User Name
Password
Access Connection
Service Name
Auto-Connect On Disconnect
97
Page 108 / 129
SpeedStream Router User Guide
Parameter
Default Value
Your Value
Use Idle Time-Out
Connection 2
User Name
Password
Access Connection
Service Name
Auto-Connect On Disconnect
Use Idle Time-Out
Connection 3
User Name
Password
Access Connection
Service Name
Auto-Connect On Disconnect
Use Idle Time-Out
Connection 4
User Name
Password
Access Connection
Service Name
Auto-Connect On Disconnect
Use Idle Time-Out
RIP
Parameter
Default Value
Your Value
Static Route
Parameter
Default Value
Your Value
Destination
Netmask
Next Hop
Interface
System Log
Parameter
Default Value
Your Value
Log Capture Level
98
Page 109 / 129
SpeedStream Router User Guide
Time Client
Parameter
Default Value
Your Value
Disabled
Primary Server IP Address
Secondary Server IP Address
UPnP
Parameter
Default Value
Your Value
Disabled
Discovery and Advertisement Only
Full IGD-Supported
Enable Access Logging
Read-Only Mode
99
Page 110 / 129
SpeedStream Router User Guide
Appendix B:
Technical Specifications
AAL and ATM Support:
VCI 0-65535 address range
VPI 0-255 address range
AAL5 support
Bridging:
IEEE 802.1.d Transparent Learning Bridge
(dynamic learning of up to 255 addresses)
Spanning Tree support
Certifications:
FCC Part 15, Class B
CE certification
Connectors:
DSL interface: RJ-11 or RJ-45 (Europe)
Ethernet interface: RJ-45
USB Type B interface (5200, 5500 series)
Diagnostic LEDs:
Power, DSL, Activity, Ethernet status;
USB status (5200, 5500 series)
Management:
Intuitive, Web-based GUI management access
SNMP support
Comprehensive hardware diagnostics
Media Interface:
RJ-11 or RJ-45 (European) DSL WAN connection
10/100Base-T RJ-45 Ethernet LAN connection
USB Type B LAN connection (5200, 5500 series)
Power:
12V power supply included, 700ma max.
5400/5500 - 12 VDC, 1000ma max.
Routing:
DHCP server/DHCP client
Network Address Port Translation (NAPT)
Network Address Translation (NAT)
Packet filtering
RFC 2364 Point-to-Point Protocol over ATM PVCs (PPPoA)
RFC 2516 Point-to-Point Protocol over Ethernet (PPPoE)
RFC 2684 (formerly 1483) Bridged Ethernet and routed encapsulation
Routing
Standards Compliance:
IEEE 802.3
USB 1.1
T1.413 issue 2
G.992.1 (G.DMT)
G.992.2 (G.Lite)
100

Rate

4.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top