1. Home
    2. /
  2. Manuals
    3. /
  3. Siemens
    4. /
  4. SpeedStream-5200
    5. /
  5. 25
Page 121 / 129 Scroll up to view Page 116 - 120
SpeedStream Router User Guide
Step
On this window:
Do this:
8
VC Wizard
Finish.
4c. If you selected the
RFC-2684 Routed
protocol:
Step
On this window:
Do this:
4c
2684 Routed
Enter Internet Protocol information as provided by your service provider.
5
Interface Options
Select interface options: firewall, attack detection system, universal plug
and play; RIP; NAT/NAPT.
6
Connection Name
Enter name to use for this connection.
7
VC Wizard
Finish.
4d. If you selected the
PPPoE
protocol:
Step
On this window:
Do this:
4d
PPPoE Type
Select PPPoE type: client, bridged, 2684 connection, or PPPoE bridge.
5
This step is dependent on your choice of protocol. Click the protocol type to jump to the specific
configuration procedures.
5a PPPoE Client
5b PPPoE Bridge
5c PPPoE 2684B Connection
5d PPPoE with PPPoE Bridge
5a. If you selected the
PPPoE protocol and
Client
type:
Step
On this window:
Do this:
5a
PPPoE Session Count
Specify the number (1-4) of PPP sessions you want to configure. For each
session, steps 4-8 will repeat.
6
User Information
Enter user name and password (both are optional).
7
PPP Options
Select PPP options for this connection: dial-up mode, auto-connect on
disconnect, idle timeout.
8
PPP Static IP
Enter static IP address (optional).
9
Interface Options
Select interface options: firewall, attack detection system, universal plug
and play; RIP; NAT/NAPT.
10
Connection Name
Enter name to use for this connection. If multiple sessions were selected,
repeat steps 4-8 until last session is configured; then go to step 6.
11
VC Wizard
Finish.
111
Page 122 / 129
SpeedStream Router User Guide
5b. If you selected the
PPPoE protocol and
PPPoE / Bridged
type:
Step
On this window:
Do this:
5b
Interface Options
Select interface options: firewall, attack detection system, universal plug
and play; RIP; NAT/NAPT.
6
Connection Name
Enter name to use for this connection.
7
VC Wizard
Finish.
5c. If you selected the
PPPoE protocol and
2684B Connection
type:
Step
On this window:
Do this:
5c
2684 Bridged
Enter Internet protocol information as provided by your service provider.
6
Interface Options
Select interface options: firewall, attack detection system, universal plug
and play; RIP; NAT/NAPT.
7
Connection Name
Enter name to use for this connection.
8
PPPoE Session Count
Specify the number (1-4) of PPP sessions you want to configure. For each
session, steps 7-11 will repeat.
9
User Information
Enter user name and password (both are optional).
10
PPP Options
Select PPP options for this connection: dial-up mode, auto-connect on
disconnect, idle timeout
11
PPP Static IP
Enter static IP address (optional).
12
Interface Options
Select interface options: firewall, attack detection system, universal plug
and play; RIP; NAT/NAPT.
13
Connection Name
Enter name to use for this connection. If multiple sessions were selected,
repeat steps 7-11 until last session is configured; then go to step 12.
14
VC Wizard
Finish.
5d. If you selected the
PPPoE protocol and
PPPoE Bridge
type, and elected to have the virtual
connection also use 2684B Connection:
Note
If you elected not to have the virtual connection also use 2684B Connection, steps 6, 7 and 8 are not relevant,
and those windows will not display.
Step
On this window:
Do this:
5d
PPPoE with Bridge
Specify whether the virtual circuit (VC) should also use a 2684 Bridged
connection.
6
2684 Bridged
Enter Internet Protocol information as provided by your service provider.
7
Interface Options
Select interface options: firewall, attack detection system, universal plug
and play; RIP; NAT/NAPT.
8
Connection Name
Enter name to use for this connection.
9
PPPoE Session Count
Specify the number (1-4) of PPP sessions you want to configure. For each
112
Page 123 / 129
SpeedStream Router User Guide
Step
On this window:
Do this:
session, steps 7-11 will repeat.
10
User Information
Enter user name and password (both are optional).
11
PPP Options
Select PPP options for this connection: dial-up mode, auto-connect on
disconnect, idle timeout.
12
PPP Static IP
Enter static IP address (optional).
13
Interface Options
Select interface options: firewall, attack detection system, universal plug
and play; RIP; NAT/NAPT.
14
Connection Name
Enter name to use for this connection. If multiple sessions were selected,
repeat steps 7-11 until last session is configured; then go to step 6.
15
VC Wizard
Finish
.
5e. If you selected the
PPPoA
protocol:
Step
On this window:
Do this:
5e
User Information
Enter user name and password (both are optional).
6
PPP Options
Select PPP options for this connection: dial-up mode, auto-connect on
disconnect, idle timeout.
7
PPP Static IP
Enter static IP address (optional).
8
Interface Options
Select interface options: firewall, attack detection system, universal plug
and play; RIP; NAT/NAPT.
9
Connection Name
Enter name to use for this connection.
10
VC Wizard
Finish.
113
Page 124 / 129
SpeedStream Router User Guide
Index
2684 Bridge Mode
PPPoE
..................................................................
33
2684 Bridge/IP Mode
PPPoE
..................................................................
33
AAL5 (ATM Adaption Layer 5)
...........................
106
Access Concentrator
................................................
20
Access the WAN Interface Configuration Wizard ..30
Adapter
....................................................................
11
Add a New User Profile
...........................................
22
Add a New Virtual Connection (VC)
......................
31
Admin User
.............................................................
58
command description
...........................................
18
Administrative User Setup window
.............
14, 15, 17
ADS
command description
...........................................
18
enabling
................................................................
76
filtering packet type
.............................................
77
globally enabling
..................................................
77
logging packet type
..............................................
77
saving settings
......................................................
77
ADS (Attack Detection System)
..............................
73
Assign Permissions
............................................
24, 28
ATM (Asynchronous Transfer Mode)
...................
106
ATM/AAL Status/Statistics
.....................................
84
Attack Detection System (ADS)
..............................
73
Basic Installation Procedure
......................................
4
Bridge Mode
............................................................
78
command description
...........................................
18
Bridged Mode
PPPoE
..................................................................
33
Broadcast Source Address
.......................................
75
Change a User Profile
..............................................
25
Change PPP Settings
...............................................
21
Change the User Name or Password
........................
58
Change User Information
........................................
25
Client Mode
PPPoE
..................................................................
32
Clone a Rule Definition
...........................................
71
Cloning IP Filter Rules
..........................................
106
Configuration Data Sheets
.......................................
93
Configure ATM Settings
.........................................
31
Connecting the Cables
...............................................
6
Constant Bit Rate
.....................................................
32
Constant IP Address
entering or changing
............................................
28
Contacting Technical Support
.................................
92
Content Filtering
......................................................
26
Control Panel
...........................................
9, 11, 12, 13
Windows 95/98/ME
...............................................
9
Coordinated Universal Time (UTC)
........................
58
Custom
firewall security level
...........................................
66
Custom IP Filter Rules
............................................
69
creating
................................................................
71
DDos (Distributed Denial of Service)
.....................
75
Default Router
.........................................................
56
default router IP address
..........................................
14
Delete a URL Name or Tag
...............................
24, 27
Delete a User Profile
................................................
22
Denial of Service (DoS)
..........................................
74
Detect connection to network media
.......................
10
DHCP
command description
...........................................
18
Relay
..................................................................
107
Server
.................................................................
107
DHCP (Dynamic Host Configuration Protocol)
....
107
DHCP configuration
................................................
55
DHCP Configuration Options
..................................
56
DHCP Server
...........................................................
56
Diagnostics
..............................................................
86
command description
...........................................
19
Disable a WAN Connection
....................................
30
Distributed Denial of Service (DDoS)
...............
74, 75
DMZ
command description
...........................................
18
configuration options
...........................................
67
disabling
...............................................................
68
enabling
................................................................
68
DMZ Settings
..........................................................
67
DNS
Resolver
.............................................................
108
Server
.................................................................
108
DNS (Domain Name Service)
...............................
108
DNS Configuration tab
............................................
10
DNS IP Address
......................................................
56
DNS Service Search Order
......................................
12
Do not require admin login
................................
15, 58
Domain Name
..........................................................
56
DoS (Denial of Service)
..........................................
74
DSL
Asymmetric
........................................................
108
Symmetric
..........................................................
108
DSL (Digital Subscriber Line)
...............................
108
DSL Status/Statistics
...............................................
84
Dynamic DNS
.........................................................
80
command description
...........................................
18
Edit an Existing URL Name or Tag
...................
23, 27
Enable a WAN Connection
.....................................
30
114
Page 125 / 129
SpeedStream Router User Guide
commonly used non-Internet
...............................
56
Enable Profiling
.......................................................
22
IP Address Restrictions
...........................................
55
Encapsulation Methods: PPP and RFC 1483
.........
108
IP Address tab
..........................................................
10
Encapsulation Type
.................................................
32
IP Filter Rules
End IP Range
...........................................................
56
command description
...........................................
18
Enter a New URL Name or Tag
........................
23, 26
IP header
..................................................................
74
Enter Constant IP Address
.......................................
25
IP Netmask
..............................................................
56
Enter Network Password window
.....................
15, 16
IP packet filtering
......................................................
2
Enter or Change the Constant IP Address
...............
28
IPv4
.........................................................................
74
Enter port range for TCP/UDP protocol
..................
63
LAN Source Address On WAN
..............................
75
Ethernet Installation
...................................................
7
Land Attack
.............................................................
75
Ethernet port connectivity
Lease Time
..............................................................
56
minimum requirements
..........................................
4
LED Display
Ethernet Status/Statistics
.........................................
85
interpreting
...........................................................
90
firewall
.......................................................................
2
LED display panel
.....................................................
3
Firewall
....................................................................
65
LEDs Not Lit
...........................................................
91
command description
...........................................
18
lights
Security Levels
....................................................
66
interpreting the LED display
................................
90
snooze control
......................................................
67
lights not lit
..............................................................
91
Firewall Level
Line Filters
command description
...........................................
18
in-line filter
............................................................
5
Firewall Log
............................................................
73
Installing
................................................................
5
command description
...........................................
18
Two-to-One Adapter
..............................................
6
Firewall Security Levels
wall-mount filter
....................................................
6
(table)
.................................................................
101
LLC
.........................................................................
32
Firmware
Local Area Connection Properties
.....................
12, 13
updating
...............................................................
88
log in using UPnP
....................................................
17
Fraggle Attack
.........................................................
75
log on to the Web interface
................................
14, 58
Fragmented ICMP Header
.......................................
76
log timestamp
..........................................................
58
Fragmented TCP Packet
..........................................
76
Logging In with UPnP
.............................................
16
General Safety Guidelines
.........................................
3
Login
Glossary
.................................................................
104
command description
...........................................
17
Hardware Installation
................................................
4
Login Password Error
..............................................
91
High
login security level
.............................................
15, 58
firewall security level
...........................................
66
Low
Home
firewall security level
...........................................
66
command description
...........................................
17
malformed packets
...................................................
73
Host
Map a New Public IP Address
.................................
62
command description
...........................................
18
Medium
Host configuration
...................................................
55
firewall security level
...........................................
66
ICMP
.......................................................................
72
Minimum System Requirements
...............................
4
ICSA 3.0a-compliancy
..........................................
108
NAPT
ICSA 3.0a-compliant
enabling only
........................................................
61
firewall security level
...........................................
66
NAPT Only Enabled
................................................
60
ICSA Labs
...............................................................
58
NAPT/NAT
...............................................................
2
Idle Timeout
....................................
20, 40, 46, 50, 53
NAT
Inconsistent IP header lengths
.................................
76
enabling only
........................................................
61
Inconsistent UDP/IP header lengths
........................
76
NAT & NAPT Disabled
..........................................
60
Infinite Time
............................................................
57
NAT & NAPT Enabled
...........................................
60
Interface Map
...........................................................
87
NAT Only Enabled
..................................................
60
command description
...........................................
19
NAT/NAPT
.......................................................
35, 60
Interface Options
.....................................................
35
command description
...........................................
18
international time standard
......................................
58
configuration options
...........................................
60
Internet Protocol (TCP/IP) Properties
................
12, 13
Configuration Window
........................................
60
Invalid IP Packet Fragment
.....................................
75
disabling both
.......................................................
61
IP address ranges
115

Rate

4.5 / 5 based on 2 votes.

Popular Siemens Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top