Option B> Macintosh Configuration
1: Configuring Windows®
To setup the Gigaset® device, you must first
configure your PC to obtain an IP address
from a DHCP server. Follow the procedure
below:
Note: The following procedures are for a PC
running Windows XP. Please refer to the
User Guide on the CD-ROM for help
configuring other operating systems.
1. Click
Start > Control Panel.
2. Double-click the
Network Connections
icon.
3. Double-click your Network Card.
4. Click
Properties.
5. Select
Internet Protocol (TCP/IP).
6. Click
Properties.
7. Select
Obtain an IP address automatically.
8. Select
Obtain DNS server address
automatically.
9. Click
OK
and exit out of the Control Panel.
10. Configure Internet Access using the
procedure that follows.
Step 3 > Choose a Configuration Method
2: Configuring Internet Access
Next, use the procedure below to make sure
your PC will use the Gigaset device (and not
Dial-up Networking) when connecting to the
Internet.
1. Click
Start > Control Panel.
2. Double-click the
Internet Options
icon.
3. Click the
Connections
tab.
4.
Click
Setup.
5.
Click
Next.
6.
Click
Connect to the Internet.
7.
Click
Next.
8.
Click
Setup my connection manually.
9.
Click
Next.
10. Select
Connect using a broadband
connection that is always on.
11. Click
Next.
12. Click
Finish.
13. Configure the Gateway using the
procedure Configuring the Gateway.
The steps required to setup your system for using the Gigaset®
depend on whether you use
a PC or a Macintosh. Select the appropriate option for your system.
Option A > Configure the PC
To setup the Gigaset® device, you must first configure your computer to obtain an IP address
from a DHCP server. Use the procedure below that corresponds to your system's operating
system.
Option B > Configure the Macintosh
Configuring OSX
1.
Click
Apple > Preferences
.
2.
Select the
Network
icon under the
Internet & Network
section.
3.
Select
Built-in Ethernet
from the
Show
drop-down menu.
4.
Select
Using DHCP Server
from the
Configure IPv4
drop-down menu
.
5.
Click Apply Now and exit the
System
Preferences
window.
6.
Configure the Gateway using the
steps that follow.
1.
Click
Apple > Control Panels > TCP/IP
.
2.
Select
Ethernet
from the
Connect via
drop-down menu.
3.
Select
Using DHCP Server
from the
Configure
drop-down menu
.
4.
Close the window and save the
changes.
5.
Configure the Gateway using the
steps that follow.
Configuring OS9
Step 4 > Configure the Gateway
Windows ME and XP users: If you have Universal Plug and Play (UPnP) enabled,
Windows may detect the Gigaset device upon startup and provide
a shortcut to the
device on the desktop. The icon will be labeled
Residential Gateway.
Double-click the icon and skip to step 3.
If your PC has not been connected to a broadband modem or other network device,
perform the PC configuration procedure below. Remember to restart each PC when finished.
1.
Start your Web Browser.
2.
In the address bar, type http://gigaset, then press Enter. The Gateway Setup Wizard
appears to guide you through the setup process.
3.
When you have completed the Gateway Setup Wizard, you can connect to the Internet or
configure additional options on the Gateway.
Congratulations!
You have completed installing your Gigaset device.
Troubleshooting
LED
Off
Green
Blinking
Green
Blinking
Red/Green
Red
Power
Power is off.
Power is on.
N/A
Flash write in
progress.
- POST in
progress.
- POST error
occurred (if
persistent).
Ethernet
1-4
- Power not
applied.
- No link.
Normal
operation, Link
okay.
User traffic
flowing in either
direction.
N/A
N/A
Wireless
- Power not
applied.
- No link.
Normal
operation, Link
okay.
Wireless user
traffic flowing in
either direction.
N/A
N/A
DSL
- Power not
applied.
- DSL Signal not
detected.
DSL line is
trained and
ready for traffic.
Steady blinking-
DSL line is
attempting to
train.
N/A
N/A
Internet
- Power not
applied.
- No LAN data
activity.
- DSL link and
WAN interface
are up.
- WAN interface
has IP Address.
N/A
N/A
N/A
Activity
- Power not
applied.
- No WAN or
LAN activity.
N/A
LAN user traffic
flowing in either
direction.
N/A
N/A
USB (model
SE568 only)
- Power not
applied.
- No link.
USB connected.
USB user traffic
flowing in either
direction.
N/A
Residential Wireless Gateway
SE567/SE568
Quick-Start Guide
007-SE01-002
Gigaset
®
Gigaset Communications USA LLC
4849 Alpha Road
Dallas, Texas 75244
(972) 852-1000
Fax (972) 852-1001
© Gigaset Communications GmbH 2008
Gigaset Communications GmbH is a
trademark licens
e
e
of Siemens AG.
All rights reserved. Subject to availability.
Rights of modification reserved.
A3 1 0 0 8 - M9 2 0 7 - R1 0 1 - 2 - 7 6 1 9