Siemens SpeedStream-5200 Router Manual PDF (Setup & Configuration Guide)

Page 91 / 129 Scroll up to view Page 86 - 90

SpeedStream Router User Guide

Configure Dynamic DNS

1.

From the main menu, click

Setup

, and then click

Dynamic DNS

.

The

Dynamic DNS Configuration

window displays.

2.

Click

Enable

.

3.

Enter the

Service Username

,

Service Password

, and

Host Name(s)

.

4.

Click

Apply

.

The router will save your configuration and automatically contact the Dynamic DNS Service with

updates.

81

Page 92 / 129

SpeedStream Router User Guide

6: Viewing Status and Statistics

The SpeedStream router Web management interface provides several windows from which you can

monitor various system status and statistics:

•

The

System Summary

displays router and PPP connection(s) information.

•

The

System Log

displays system activity

•

The

Interface Map

displays a graphical depiction of system connections.

•

The

Status/Statistics

windows allow you to view the current system status for:

-

ATM/AAL

-

DSL

-

Ethernet

-

USB

•

The

Routes

window displays the current routing table.

Additionally, several windows that allow you to change configuration settings also display the current

settings (please refer to the previous section for detailed instructions on configuring specific settings):

•

The

Firewall – DMZ Configuration

window displays the current DMZ status and host IP address.

•

The

Firewall – Snooze Control

window displays the current snooze interval.

•

The

Port Forwarding Configuration

window displays the current port forwarding configurations.

•

The

Static Routes

window displays currently configured static routes.

•

The

UPnP Configuration

window displays the current UPnP mode.

•

The

Time Client Configuration

window displays the current primary and secondary server IP

addresses.

System Summary

The

System Summary

window provides

basic descriptive information that identifies

the router, system type, current software and

firmware versions, the MAC address (unique

device identifier), and the status of currently

configured connections. Connection

information includes the identification and

status of configured point-to-point (PPP) and

static connections.

Note

The

System Summary

window

illustrated here is an example only; your

display will vary according to your actual

connections.

82

Page 93 / 129

SpeedStream Router User Guide

To display the

System Summary

window:

•

From the main menu, click

Status and Statistics

, and then click

System Summary

.

The

System Summary

window displays.

System Log

The

System Log

records all system activity, including what actions were performed, what packets were

dropped and what packets were forwarded. This information allows you to make informed decisions

about the need to add new filter rules.

Note

This

screenshot is

an example

only and will

differ from

your actual

window

display.

System Log Configuration Options

•

All Events

:

Logs all events.

•

Informative Events

:

Logs general information about non-critical changes in system status.

•

Minor Events

:

Logs events that might indicate a condition requiring user intervention, and generates a warning about

this change in the system status.

•

Major Events

:

Logs events that require immediate user attention, and generates a warning about critical conditions

or changes in the system status.

•

None:

Does not log any events.

Display the System Log

1.

From the main menu, click

Status and Statistics

, and then click

System Log

.

The

System Log

window displays.

Update the Display

Click

Refresh

.

•

The window refreshes with the current data.

83

Page 94 / 129

SpeedStream Router User Guide

Select the Capture Level

Select the log capture level;

then click

Set

.

•

The window refreshes with the current data.

ATM/AAL Status/Statistics

Note

The following screenshot is an example

only and will differ from your actual window

display.

•

From the main menu, click

Status and

Statistics

, and then click

ATM/AAL

.

The

ATM/AAL Status/Statistics

window

displays.

DSL Status/Statistics

Note

This following screenshot is an example

only and will differ from your actual window

display.

From the main menu, click

Status and

Statistics

, and then click

DSL

.

•

The

DSL Status/Statistics

window

displays.

84

Page 95 / 129

SpeedStream Router User Guide

85

Ethernet Status/Statistics

Note

The following screenshot is an example

only and will differ from your actual window

display.

•

From the main menu, click

Status and

Statistics

, and then click

Ethernet

.

The

Ethernet Status/Statistics

window

displays.

USB Status/Statistics

Note

The following screenshot is an example

only and will differ from your actual window

display.

•

From the main menu, click

Status and

Statistics

, and then click

USB

.

The

USB Status/Statistics

window

displays.

Routes

The

Routes

window displays the current routing table that contains the data pertaining to all currently

known static and dynamic IP routes.

Note

Please refer to the Online Help for

description of the fields in the Current

Routing Table.

•

From the main menu, click

Status and

Statistics

, and then click

Routes

.

The

USB Status/Statistics

window

displays.

Rate

Popular Siemens Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share