Page 16 / 144
Scroll up to view Page 11 - 15
ADSL Router User Manual
p
When the welcome screen appears, click
Next
for next step.
q
When the InstallShield Wizard Complete appears, click
Finish
.
r
Plug the USB cable between your device and PC.
Note: If the USB device is not detected, check the USB cable
between the PC and the device. Also verify that the device is
power on.
s
The system will detect the USB driver automatically.
8
Page 17 / 144
Chapter 3: Configuration
t
The system is trying to find proper driver for your device and copying the files
automatically.
u
After the file copying is finished, a completing message will appear.
v
You can use the device now.
For Windows Vista
For Vista users, please press
Continue
whenever a prompted window asking for permission to
continue during USB driver installation process (see the figure below for example).
To install the USB driver before connect the router to the PC, here provides two methods.
Method One
– Use the driver CD came with the product package.
n
Run the USB installation program on the CD provided in your router package.
o
An
InstallShield Wizard
will appear. Please wait for a moment.
9
Page 18 / 144
ADSL Router User Manual
p
When the welcome screen appears, click
Next
for the next step.
q
When the complete message of InstallShield Wizard appears, click
Finish
.
r
Link your router and the PC with a USB cable.
s
The system will detect the USB driver automatically.
10
Page 19 / 144
Chapter 3: Configuration
Note: If the USB device is not detected, check the USB cable between the PC and
the device. Also make sure that the device is power on.
t
After the file copying finished, a completing message will appear.
u
You can use the router now.
11
Page 20 / 144
ADSL Router User Manual
Method Two –
Run a
silent installation.
n
Copy the USB driver folder from the driver CD to somewhere on the PC. (In our example,
the driver files are put under
D:\Siemens WHQLed
.)
o
Open
Start
menu, key in
cmd
in the blank and press enter. Then click
cmd.
p
When the Command Prompt screen appears, point to the driver folder on your PC, and then
enter
setup -s
. Press enter to start silent installation.
Then click the icon.
Key in
cmd
and
press
Enter
.
q
The system will install the driver automatically. You can connect your router and the PC
with a USB cable now.
r
The system will detect the USB driver automatically.
Note: If the USB device is not detected, check the USB cable between the PC and
the device. Also make sure that the device is power on.
s
After the file copying finished, a completing message will appear.
t
You can use the router now.
12
19216811.live