Chapter 2: System Requirement and Installation

Chapter 2: System Requirement and

Installation

System Requirement

To access the ADSL Router via Ethernet, the host computer must meet the following requirements:

²

With Ethernet network interface.

²

Must have TCP/IP installed.

²

Set client PC with obtain an IP

address automatically or set fix IP address.

²

With a web browser installed: Internet Explorer 5.x or later.

The ADSL Router is configured with the

default IP address of 192.168.1.1

and subnet

mask of

255.255.255.0.

As the DHCP server is

Enable

by default, The DHCP clients should

be able to access the ADSL Router. Or you could assign an IP address to the host PC first for initial

configuration.

You also can manage the ADSL Router through a web browser-based manager:

ADSL ROUTER

CONTROL PANEL

. The ADSL Router manager uses the HTTP protocol via a web browser to

allow you to set up and manage the device.

To configure the device via web browser, at least one properly-configured PC must be

connected to the network (either connected directly or through an external hub/switch

to the LAN port of the device).

Choosing a place for the ADSL Router

n

Place the ADSL Router close to ADSL wall outlet and power outlet for the cable to reach it

easily.

o

Avoid placing the device in places where people may walk on the cables. Also keep it away

from direct sunlight or heat sources.

p

Place the device on a flat and stable stand.

3

ADSL Router User Manual

Connecting the ADSL Router

Follow the steps below to connect the related devices.

n

Connecting the ADSL line. Connect the

DSL port of the device to your ADSL

wall outlet with RJ-11 cable.

o

Please attach one end of the Ethernet

cable with RJ-45 connector to the

LAN

port of your ADSL Router.

p

Connect the other end of the cable to the

Ethernet port of the client PC.

q

Connect the supplied power adapter to

the

PWR

port of your ADSL Router,

and plug the other end to a power outlet.

r

Turn on the power switch.

4

Chapter 3: Configuration

For connecting through a hub, please refer to the following diagram for an example.

Install the USB Driver

For Windows ME

n

Run the USB installation program from the CD provided by your device package.

o

An InstallShield Wizard will appear. Please wait for a moment.

p

When the welcome screen appears, click

Next

for next step.

q

When the InstallShield Wizard Complete appears, click

Finish

.

r

Plug the USB cable between your device and PC.

Note: If the USB device is not detected, check the USB cable

between the PC and the device. Also verify that the device is

power on.

s

The system will detect the USB driver automatically.

Now, the system will copy the proper

files for this device.

t

When the file copying finished, the dialog above will close. Now the USB driver is installed

properly. You can use the device.

For Windows 2000

n

Run the USB installation program from the CD provided by your device package.

5

ADSL Router User Manual

o

An InstallShield Wizard will appear. Please wait for a moment.

p

When the welcome screen appears, click

Next

for next step.

q

When the InstallShield Wizard Complete appears, click

Finish

.

r

Plug the USB cable between your device and PC.

6

Chapter 3: Configuration

Note:

If the USB device is not detected, check the USB cable

between the PC and the device. Also verify that the device is

power on.

s

The system will detect the USB driver automatically.

Now, the system will copy the proper

files for this device.

t

When the file copying finished, the dialog above will close. The InstallShield Wizard

Complete appears, click

Finish

. Now the USB driver is installed properly. You can use the

device.

For Windows XP

n

Run the USB installation program from the CD provided by your device package.

o

An InstallShield Wizard will appear. Please wait for a moment.

7