Siemens SL2-141 Router Manual PDF (Setup & Configuration Guide)
Given below is full router user manual of Siemens SL2-141 router model. You can also download this manual in PDF Format to read later on your computer.
Product user manuals come handy in case you want to know all functionalities of your device, troubleshooting, fist time configuration & setup and in many other situations.
Page 1 / 144
SL2-141/SL2-141-I ADSL Router
User’s Manual
Rev: 1.5
2007/03/30
No part of this publication may be reproduced in any form by any means without the prior written permission. Other
trademarks or brand names mentioned herein are trademarks or registered trademarks of their respective companies.
This manual currently suits for SL2-141/SL2-141-I.
Page 2 / 144
Safety
Notes
For Installation
±
Use only the type of power source indicated on the marking labels.
±
Use only power adapter supplied with the product.
±
Do not overload wall outlet or extension cords as this may increase the risk of
electric shock or fire. If the power cord is frayed, replace it with a new one.
±
Proper ventilation is necessary to prevent the product overheating. Do not block or
cover the slots and openings on the device, which are intended for ventilation and
proper operation. It is recommended to mount the product with a stack.
±
Do not place the product near any source of heat or expose it to direct sunlight.
±
Do not expose the product to moisture. Never spill any liquid on the product.
±
Do not attempt to connect with any computer accessory or electronic product
without instructions from qualified service personnel. This may result in risk of
electronic shock or fire.
±
Do not place this product on unstable stand or table.
For Using
±
Power off and unplug this product from the wall outlet when it is not in use or
before cleaning. Pay attention to the temperature of the power adapter. The
temperature might be high.
±
After powering off the product, power on the product at least 15 seconds later.
±
Do not block the ventilating openings of this product.
±
When the product is expected to be not in use for a period of time, unplug the
power cord of the product to prevent it from the damage of storm or sudden
increases in rating.
For Service
Do not attempt to disassemble or open covers of this unit by yourself. Nor should you
attempt to service the product yourself, which may void the user’s authority to operate it.
Contact qualified service personnel under the following conditions:
±
If the power cord or plug is damaged or frayed.
±
If liquid has been spilled into the product.
±
If the product has been exposed to rain or water.
±
If the product does not operate normally when the operating instructions are
followed.
±
If the product has been dropped or the cabinet has been damaged.
±
If the product exhibits a distinct change in performance.
Warning
±
This equipment must be installed and operated in accordance with provided
instructions and a minimum 20 cm spacing must be provided between computer
mounted antenna and person’s body (excluding extremities of hands, wrist and feet)
during wireless modes of operation.
±
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Caution
±
Any changes or modifications not expressly approved by the party responsible for
compliance could void the authority to operate equipment.
ii
Page 3 / 144
ADSL Router User Manual
FCC
This equipment must be installed and operated in accordance with provided instructions and a
minimum 20 cm spacing must be provided between computer mounted antenna and person’s body
(excluding extremities of hands, wrist and feet) during wireless modes of operation.
FCC Class B Notice
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired
operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment can generate, use
and radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
z
Reorient or relocate the receiving antenna.
z
Increase the separation between the equipment and receiver.
z
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
z
Consult the dealer or an experienced radio/television technician for help.
IC Statement
To prevent radio interference to the licensed service, this device is intended to be operated indoors
and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is
installed outdoors is subject to licensing
ICES-003 Class B Notice - Avis NMB-003, Classe B
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
iii
Page 4 / 144
Contents
iv
Page 5 / 144
Preface
Preface
Thank you for choosing the Asymmetric Digital Subscriber Line (ADSL) Router. With the
asymmetric technology, this device runs over standard copper phone lines. In addition, ADSL allows
you to have both voice and data services in use simultaneously all over one phone line.
SL2-141/SL2-141-I Wireless ADSL2+ Router is a DSL broadband access device which allows
ADSL connectivity while providing 802.11g wireless LAN capabilities for home or office users.
It
supports ADSL2/ADSL2+ and is backward compatible to ADSL, even offers auto-negotiation
capability for different flavors (G.dmt, G.lite, or T1.413 Issue 2) according to central office
DSLAM’s settings (Digital Subscriber Line Access Multiplexer). Also the feature-rich routing
functions are seamlessly integrated to ADSL service for existing corporate or home users. Now users
can enjoy various bandwidth-consuming applications via SL2-141/SL2-141-I Wireless ADSL2+
Router.
Features
ADSL Compliance
³
ANSI T1.413 Issue 2
³
ITU G.992.1 Annex A (G.dmt)
³
ITU G.992.2 Annex A (G.lite)
³
ITU G.994.1 (G.hs)
³
Support dying gasp
³
Maximum Rate: 8 Mbps for downstream and 1 Mbps for upstream
ADSL2 Compliance
³
ITU G.992.3 Annex A (G.dmt)
³
ITU G.992.4 Annex A (G.lite)
³
Maximum Rate: 12 Mbps for downstream and 1 Mbps for upstream
ADSL2+ Compliance
³
ITU G.992.5 Annex A (G.dmt)
³
Maximum Rate: 24 Mbps for downstream and 1.2 Mbps for upstream
Wireless LAN Compliance Features
³
IEEE 802.11g and IEEE 802.11b
³
Data Rate: 54, 48, 36, 24, 18, 12, 9, 6 Mbps for 802.11g/11, 5.5, 2, 1 Mbps for 802.11b
³
Modulation Technique: OFDM for 802.11g; CCK (11 Mbps, 5.5 Mbps) for 802.11b; DQPSK
19216811.live