1. Home
    2. /
  2. Manuals
    3. /
  3. Siemens
    4. /
  4. SL2-141
    5. /
  5. 17
Page 81 / 144 Scroll up to view Page 76 - 80
Chapter 5:Connection Mode
IP over ATM
If the type you have to choose is IP over ATM, please refer to the following information.
IPoA is an alternative of LAN emulation. It
allows TCP/IP network to access ATM
network and uses ATM quality of service’s
features.
Choose
IPoA
and click
Next.
None:
If it is not necessary to set the WAN IP
address, please click this button.
Obtain an IP address automatically:
Click this button to make the system get an
IP address automatically.
WAN IP Address:
Type in the IP address that you got from ISP
for the WAN interface.
WAN Subnet Mask:
Type in the subnet mask address that you got
from ISP for the WAN interface.
Obtain DNS server address automatically:
Click this button to make the system get
DNS server automatically.
Use the following DNS server address:
If you want to set DNS server by yourself,
you have to click on this button to invoke the
following entries.
Primary DNS server:
Type in your preferred DNS server that you
got from ISP.
Secondary DNS server:
Type in the alternate DNS server that you got
from ISP.
Click
Enable NAT
if you want. As for the
detailed NAT settings, it will be described in
later sections.
Click
Enable QoS
for your necessity.
It can improve the performance for selected
classes of applications. Before you check
this item, please assign the priorities for
various applications from the Quality of
Service menu of Advanced web page. Be
aware that IP QoS also consumes system
resources, the number of created PVCs will
be reduced consequently.
Please type in the WAN IP address, Subnet Mask and DNS server addresses. Then Click
Next
to get the following page.
73
Page 82 / 144
ADSL Router User Manual
In the
Configure LAN side Settings
web
page,
you have to fill in the data requested
here.
Primary IP Address:
Type in the first IP address that you got from
your ISP for your LAN connection.
Subnet Mask:
Type in the subnet mask that you got from
your ISP for your LAN connection.
Configure the second IP Address and
Subnet Mask for LAN interface:
Check this box to make another set of IP
Address and Subnet Mask to connect to your
router if they are not included in the range
that DHCP server accepts.
Secondary IP Address:
Type in the second IP address that you got
from your ISP for your LAN connection.
Subnet Mask:
Type in the subnet mask that you got from
your ISP for your LAN connection.
DHCP Server On:
Check this item if DHCP service is needed
on the LAN. The router will assign IP
address, gateway address for each of your
PCs.
Start IP Address:
Type in the start point IP address.
End IP Address:
Type in the end point IP address.
Leased Time:
Type in the duration for the time. The default
is 1day.
On the Configure LAN side Settings web page, the IP
address and subnet mask will be shown on it. You can
modify them if needed. Click
Next
for next page.
DHCP Server Off:
Check this item if DHCP service isn’t
needed on the LAN.
You can check it at this time. If you find
something is incorrect, click
Back
to change
the settings. If everything is OK, click
Finish
to accept these settings. And the
following page will appear.
74
Page 83 / 144
Chapter 5:Connection Mode
Now, the system will reboot to activate the
new settings that you have done in this
section.
Please wait for 2 minutes for restarting the
router.
75
Page 84 / 144
ADSL Router User Manual
Bridging
If the type you choose is
Bridging
, please refer to the following information.
The bridging mode can configure your router
to send packets received on any port such as
ATM PVC or Ethernet with a broadcast
MAC address to all other ports.
Choose
Bridging
and click
Next
.
None:
If it is not necessary to set the WAN IP
address, please click this button.
Obtain an IP address automatically:
Click
this button to make the system get an IP
address automatically.
WAN IP Address:
Type in the IP address that you got from ISP
for the WAN interface.
WAN Subnet Mask:
Type in the subnet mask address that you got
from ISP for the WAN interface.
Obtain DNS server address automatically:
Click this button to make the system get
DNS server automatically.
Use the following DNS server address:
If you want to set DNS server by yourself,
you have to click on this button to invoke the
following entries.
Primary DNS server:
Type in your preferred DNS server that you
got from ISP.
Secondary DNS server:
Type in the alternate DNS server that you got
from ISP.
Click
Enable NAT
if you want. As for the
detailed NAT settings, it will be described in
later sections.
Click
Enable QoS
for your necessity.
It can improve the performance for selected
classes of applications. Before you check
this item, please assign the priorities for
various applications from the Quality of
Service menu of Advanced web page. Be
aware that IP QoS also consumes system
resources, the number of created PVCs will
be reduced consequently.
In the
Configure LAN side Settings
web
page,
you have to fill in the data requested
here.
76
Page 85 / 144
Chapter 5:Connection Mode
Primary IP Address:
Type in the IP address that you got from your
ISP for LAN interface.
Subnet Mask:
Type in the subnet mask that you got from
your ISP for LAN interface.
MTU:
It means the maximum size of the packet
that transmitted in the network. The packet
of the data greater than the number set here
will be divided into several packets for
transmitting. Type in the number into the
field of
MTU
. The default setting is 1500.
DHCP Server On:
Check this item if DHCP service is needed
on the LAN. The router will assign IP
address, gateway address for each of your
PCs.
Start IP Address:
Type in the start point IP address.
End IP Address:
Type in the end point IP address.
Leased Time:
Type in the duration for the time. The default
is 1day.
DHCP Server Off:
Check this item if DHCP service isn’t
needed on the LAN.
Click
Next
to get into next web page.
You can check it at this time. If you find
something is incorrect, click
Back
to change
the settings. If everything is OK, click
Finish
to accept these settings. And the
following page will appear.
Now, the system will reboot to activate the
new settings that you have done in this
section.
Please wait for 2 minutes for restarting the
router.
77

Rate

3.5 / 5 based on 2 votes.

Popular Siemens Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top