Siemens SL2-141 Router Manual PDF (Setup & Configuration Guide)

Page 76 / 144 Scroll up to view Page 71 - 75

ADSL Router User Manual

Quick Start

The pages for the Quick Start provide user a quick way to set for the router. If you do not know more

about the router, you can use the Quick Start pages to adjust basic settings to make your router

activating.

Connect to Internet

This is a quick way to connect to Internet by

using PPPoE interface, click

Connect to

Internet

to open the web page.

Enter the user name and password for your

ADSL router and click

Connect

.

The system will connect automatically, then

you can access Internet.

Quick Setup

The quick setup wizard will guide you to

configure the DSL router through some

steps.

Auto Scan Internet Connection (PVC):

The default setting is checked. If there is no

any PVC configured in your ADSL router,

you can check this item. Otherwise, please

uncheck this box.

VPI (Virtual Path Identifier)

: Identifies the

virtual path between endpoints in an ATM

network. The valid range is from 0 to 255.

To enter the setting, please refer to the

setting that the ISP gave you.

VCI (Virtual Channel Identifier)

:

Identifies the virtual channel endpoints in an

ATM network. The valid range is from 32 to

65535 (1 to 31 is reserved for well-known

protocols). To enter the setting, please refer

to the setting that the ISP gave you.

After finished entering the VPI/VCI value,

please click

Connection Type

The system provides several protocols for you to choose. Your ISP will offer you the most suitable

settings of the protocol. Before you set this page, please refer to the protocol that your ISP gave you.

68

Page 77 / 144

Chapter 5:Connection Mode

After clicking on the

VPI/VCI web page, the following screen will

appear. Please choose the connection type

and encapsulation mode that you want to use

and click

For example, PPP over Ethernet (PPPoE) in

this screen is selected. Next, we are going to

tell you different webpage for different

protocol that you choose in this page.

69

Page 78 / 144

ADSL Router User Manual

PPP over ATM/ PPP over Ethernet

If the type you choose is PPP over ATM or PPP over Ethernet, please refer to the following

information.

According to the ISP’s configuration on the

server, you can choose PPPoE and PPPoA

modes. If the ISP provides PPPoE service,

the connection type selection will be decided

as whether the LAN side device is running a

PPPoE client or the router is to run the

PPPoE client. This router supports both

situations simultaneously.

Choose

PPPoA

or

PPPoE

and click

In this screen, you have to choose the

settings for WAN IP. To get the IP address

automatically, click the

Obtain an IP

address automatically

radio button. Or

click

Use the following IP address

button

and enter the IP address for WAN interface.

Click

Enable NAT

if you want. As for the

detailed NAT settings, it will be described in

later sections.

Click

Enable QoS

for your necessity.

It can improve the performance for selected

classes of applications. Before you check

this item, please assign the priorities for

various applications from the Quality of

Service menu of Advanced web page. Be

aware that IP QoS also consumes system

resources, the number of created PVCs will

be reduced consequently.

The

MTU

means the maximum size of the

packet that transmitted in the network. The

packet of the data greater than the number

set here will be divided into several packets

for transmitting. Type in the number into the

field of

MTU

. The default setting is 1492

.

Click

70

Page 79 / 144

Chapter 5:Connection Mode

PPP Username:

Type in the username that you got from your

ISP.

PPP Password:

Type in the password that you got from your

ISP.

Always On:

Check this button to make the connection is

always active.

Dial on Demand:

Click this button to make a connection while

in demand. Enter the timeout to cut off the

network connection if there is no activity for

this router.

Manually Connect:

Click this button to make a connection by

pressing the Connect button on the

Advanced Setup- Internet-Connections web

page.

Please type the username and password that you got

from your ISP. Then click

In the

Configure LAN side Settings

web

page,

you have to fill in the data requested

here.

Primary IP Address:

Type in the first IP address that you got from

your ISP for your LAN connection.

Subnet Mask:

Type in the subnet mask that you got from

your ISP for your LAN connection.

Configure the second IP Address and

Subnet Mask for LAN interface:

Check this box to make another set of IP

Address and Subnet Mask to connect to your

router if they are not included in the range

that DHCP server accepts.

Secondary IP Address:

Type in the second IP address that you got

from your ISP for your LAN connection.

Subnet Mask:

Type in the subnet mask that you got from

your ISP for your LAN connection.

MTU:

It means the maximum size of the packet

that transmitted in the network. The packet

of the data greater than the number set here

will be divided into several packets for

transmitting. Type in the number into the

field of

MTU

. The default setting is 1500

.

DHCP Server On:

Check this item if DHCP service is needed

on the LAN. The router will assign IP

address, gateway address for each of your

On the Configure LAN side Settings web

page, the IP address and subnet mask will

be shown on it. You can modify them if

needed.

Type in all the necessary settings and

click

71

Page 80 / 144

ADSL Router User Manual

PCs.

Start IP Address:

Type in the start point IP address.

End IP Address:

Type in the end point IP address.

Leased Time:

Type in the duration for the time. The default

is 1day.

DHCP Server Off:

Check this item if DHCP service isn’t

needed on the LAN.

You can check it at this time. If you find

something is incorrect, click

Back

to change

the settings.

If everything is OK, click

Finish

to accept

these settings.

Now, the system will reboot to activate the

new settings that you have done in this

section.

Please wait for 2 minutes for restarting the

router.

72

Rate

Popular Siemens Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share